Roof Rack Tie Down Rings

11 Questions asked on Roof Rack Tie Down Rings • Ask a Question

Ask us anything

Q Kyle • 08/28/2020, 3:57:25 PM Are these available powder coated?

A 09/03/2020, 9:03:48 AM They are not.

Q Matt • 09/24/2020, 1:34:43 AM Will these work with your OEM cross bar replacements?

A 09/24/2020, 11:01:43 AM The carriage bolts included will be too small for the slots in the bars, but you could just use regular 1/4" bolts and washers from the hardware store with the rings.

Q Adam Scott • 12/18/2020, 5:39:07 PM Are these the only tie downs that work with your rack? My existing tie downs are hex bolt style and do not fit into the t-slot on my V4x4 rack.

A 12/23/2020, 5:37:41 PM These are the only ones that we sell that work. There may be others on the market, but we haven't tested.

Q Matthew Crumpler • 03/06/2021, 7:56:10 AM Do these work with the Victory 4 runner cross bars I bought?

A 03/08/2021, 1:18:58 PM They work with any of our roof racks, but aren't designed for the 4Runner crossbars (V4RRK-CS)

Q Jennett • 06/11/2021, 6:02:34 PM Is this all I need to use these or will I need to also use the t-slot nut with these?

A 06/25/2021, 11:53:18 AM They include the t-slot nuts.

Q brian • 06/25/2021, 3:00:46 PM What is the weight rating for these brackets? I did not find anything listing this.

A 07/08/2021, 1:15:34 PM The only data we have on them is 132 lbs safe working lifting load. These are not rated for overhead lifting however.

Q Gil Villanueva • 06/27/2021, 2:25:30 PM Will these fit the Land Rover OEM rack for Defender 2021?

A 07/08/2021, 1:15:34 PM Not sure, sorry.

Q brian • 07/08/2021, 2:31:05 PM I had previously asked about weight rating and this is a follow up. Is it possible to get something like what is provided here (my selection was example only I know dimensions do not match exactly)? https://www.mcmaster.com/eyebolts/ https://www.mcmaster.com/33045T77/ https://www.mcmaster.com/mvC/library/20170918/33045T770_304%20STAINLESS%20STEEL%20EYEBOLTL.GIF

A 07/23/2021, 10:58:16 AM We don't have that data, sorry.

Q Jerry • 08/12/2021, 1:54:06 AM What material are these made from? Chrome plated steel? Stainless steel?

A 08/12/2021, 4:22:04 PM 304 Stainless Steel

Q Cohen Bruce B. • 11/22/2021, 10:58:21 AM Will these fit 80/20 series 15? I have an Overland camper and that is what the OEM used on the rack.

A 12/01/2021, 9:39:41 AM Our racks use 1/4" hardware. Looks like series 15 might use 5/16", but have not tested to confirm.

Q Mike • 07/11/2023, 1:21:13 AM Will these work on the GoFast Beef Rack Load Bars?

A 08/04/2023, 4:31:40 PM These are specific to 80/20 10 series extruded aluminum bars.

Currently Viewing Reviews with a rating of 5. Click here to reset.

★★★★★ ★★★★★

5/5 Stars out of 1 Review

Write a Review.

1 ★