4Runner Rear Bumper | Strike | 5th Gen (10-24)
No reviews yet. Write review.
Price:
$1,949.00
Now:
$1,754.10
Code: V4R5RS2
Weight: 110 (lbs)
- CNC cut and formed from .188" steel.
- Built-in hitch.¹
- Built-in provisions for cube lights.
- Built-in provisions for left and right Adventure Carriers (can be added at any time, sold separately; see related products below.)
- Built-in Hi-Lift jack points.
- Does not retain Limited proximity sensors.
- Compatible with BSM sensors with relocation brackets (see related products below).
- Bolt-on installation.
- Proudly designed and made in the USA.
When you need maximum protection, recovery options, and a modular swingout system; our Strike Series rear bumper is the perfect choice. This made in the USA bumper features integrated cube light mounts, 3/4" recovery tabs, and built-in provisions for dual swingouts that can be added or removed at any time! (Sold separately.) The bumper is available in a two-stage satin textured black powdercoat over durable zinc primer finish.
Ships freight only! Rate calculated at checkout. Please contact us with any questions: https://www.victory4x4.com/CTUS.html
- ¹ Designed to support the loads of the factory tow capacity, but carries no SAE certification, nor is it designed to meet any DOT or FMCSA regulation.
We produce these products in a low volume compared to the OEMs or aftermarket receiver hitch companies. As such, it's not feasible for us to get this product tested against SAE J684 specifications or design it meet specific DOT or FMCSA regulations. So while we try to over-engineer our products with the loads of the factory vehicle capacity in mind; towing a trailer on public highways is at your own risk and we make no claims on the legality or viability of doing so. We cannot offer any recommendations on capacity beyond this. If the ratings of the factory receiver hitch are important to you, we would recommend choosing a bumper that keeps that in place.
Looking for answers to common questions about us or our products? See our FAQ here.
6 Questions asked on 4Runner Rear Bumper | Strike | 5th Gen (10-24)
•
Ask us anything
Q
Seth • 11/11/2023, 0:36:17 AM
Will this bumper affect the blind spot monitoring feature
A
11/22/2023, 12:23:45 PM
Yes, you'll want to add our BSM relocation brackets.
https://www.victory4x4.com/product/V4R5-BSM.html
Q
Carly • 11/22/2023, 11:01:45 AM
Is it possible to order it without a powder coating?
A
11/22/2023, 11:26:13 AM
We currently only offer this bumper in a PC finish.
Q
Blake • 12/05/2023, 2:13:40 AM
What’s the weight of the bumper without accessories and what’s the weight of a single swing arm?
A
12/05/2023, 4:43:03 PM
That would depend on which accessories are added, please see each individual product page for product weights. The bumper itself is 110 lbs.
Q
Horace • 12/13/2023, 3:33:05 PM
What is the current lead time for 5th gen 4runner rear bumper?
A
12/14/2023, 10:06:12 AM
https://www.victory4x4.com/LEADTIMES.html
Q
Blake • 12/17/2023, 5:44:19 PM
Dimensions for the cutout for the two cube lights?
A
12/18/2023, 3:06:21 PM
These are designed to accept 3x3 cube lights.
Q
Chris • 01/19/2024, 3:25:46 PM
Will this fit on the 2015 LIMITED 4 runner?
A
01/19/2024, 3:41:59 PM
Yes, it fits Limited models.
There are no reviews for this item yet.
Write a Product Review: 4Runner Rear Bumper | Strike | 5th Gen (10-24)
PROTECTION + STORAGE
Add clearance and protection off-road, while adding exterior storage.
ACCESSORY MOUNTS
A wide variety of accessory / lighting mounts available and the list is growing!
See related products below!
UNMATCHED STRENGTH
The Victory 4x4 Bomb Proof Spindle design makes for the strongest carriers on the market.
Please note: Install videos are meant to be used as a guide, and aren't always the most up to date information on product installation and improvements.
Please be sure to read the PDF installation instructions as well.
Please be sure to read the PDF installation instructions as well.
