4Runner Roof Rack Crossbar | 5th Gen (10+)
★★★★★ ★★★★★ 5.00/5 Stars. (14 Reviews)
- CNC cut and formed from .188" steel.
- Sold individually.
- Do not work with Trail Edition racks.
- Measure 40 3/8" x 3".
- Proudly designed and made in the USA.
Roof Rack Crossbar | 5th Gen (10+)
Designed to work with your stock rails and support any gear you might need. (RTT, cargo, etc...)
Looking for answers to common questions about us or our products? See our FAQ here.
42 Questions asked on 4Runner Roof Rack Crossbar | 5th Gen (10+) •
Ask us anything
Q Carlos • 06/17/2020, 1:08:38 AM My roof top tent weighs 175 pounds. Would I be able to put a roof top tent with these cross bars? And if yes how many of them would I need ? I have 2019 4Runner sr5
A 06/24/2020, 5:36:22 PM That is above the weight capacity of the factory rack.
Q Ginger • 06/22/2020, 10:29:06 AM I can’t find a good picture of the clearance between the crossbars and the roof. We typically carry a cargo box and it has those clamps underneath that are pretty tall until tightened down. Can you provide a picture looking over the tailgate All along the roof with the crossbars installed?
A 06/24/2020, 5:36:22 PM Not much clearance in the middle .75" to 1"
Q Jonathan Dearth • 06/30/2020, 5:58:56 PM Where are the instructions to properly mount these to the vehicle? Mine came with none. Im sure it is fairly straight forward however, there may be something I am not aware of here so instruction sheet would be awesome.
A 07/01/2020, 10:08:43 AM Just added those instructions. They are on the product page.
Q Jeff Steffens • 07/06/2020, 12:20:42 PM I saw one question answered said you have about 1" in the middle of clearance between roof and crossbar. What is the measurement closer to the sides? I have a Yakima surfboard rack and would want to mount that to these crossbars but want to make sure it will clear. Thank you
A 07/07/2020, 2:39:07 PM Closer to 2" of clearance.
Q Rob • 07/07/2020, 10:11:37 PM Is this compatible on the 2020 4runners roof rails? I see some other manufacturers not being compatible with the 2020 4runners.
A 07/15/2020, 1:48:15 PM While there is a part number change in 2019 for the factory rack, we haven't seen any issues on compatibility.
5.00/5 Stars out of 14 Reviews
Write a Product Review: 4Runner Roof Rack Crossbar | 5th Gen (10+)
Pages 1 2
BIG MIKE (GA) | January 28th, 2021
After exhaustive research, I decided on these crossbars and they fit the bill and my new 4Runner perfectly. I wanted a flat rack for the vehicle to provide flexibility to attach all sorts of stuff and bought 3 and will consider gettting a 4th. I was surprised to find the elevator bolts with the order (may want to include that info somewhere on the listing). AWESOME CUSTOMER SERVICE AND AMERICAN INGENUITY AT ITS BEST!!!
Pamibaga (Seattle) | January 21st, 2021
It barely took a week before it arrived. It was easy to install. The coating is beautiful. It looks very natural and it is very strong. You can probably stack another car on these (At least a Sedan lol). I did not notice any wind noise, but I could hear a little humming noise if I really try and pay attention to it. The best crossbar your can get for your 4runner! Also, the customer service is just too good. They solve issues faster than the speed of light!
B D (CA) | January 15th, 2021
I started with factory cross bars and took them back to the dealer because they looked like the would snap under stress. Then I tried one of those major brands (named after a city in Washington state) and was disgusted with how insecure they were due to a rubber strap design. I bought these and had them installed in 20 minutes. Third time was a charm. These are an amazing piece of American ingenuity. Well done Victory 4x4!. I have complete confidence in these and now when I haul Canoe or Kayaks or anything else I won't have to worry about them. Nice and secure. And look like they will last a few 100,000 miles!
T G (USA) | November 4th, 2020
I like them so far. Easy to install. Much more useful than the stock cross bars. Saves me from having to buy something to hold my sand boards. so already paying for themselves.
Dylan Fairweather (Seattle) | November 3rd, 2020
I have to say I did a ton of research (reading forums, checking different manufacturers, comparing crossbars) before I purchased and I finally settled on these. I’m so glad I did. First of all the quality of the bars stand out instantly. The power coating is beautiful. Secondly the install is a breeze. One a the main reasons I ordered these besides the price (which is great) was that people said there was no road noise. I did notice slight road noise at first but after a adjustment to there placement and some time I don’t notice the noise anymore. If you’re looking for great crossbars I highly recommend these.
Benjamin (Wi) | October 12th, 2020
Super strong, look great, easy to install! I reccomend nothing else!
Mike Beyers (New Jersey) | October 12th, 2020
The crossbars are very well made and easy to install. They are stronger than I thought they would be and a great option if you're not looking to spend over $1000 on a roof rack.
Wes (Wisconsin) | August 5th, 2020
Quick and easy install. Amazing build quality. There literally is no reason to consider stock cross bars when these exist. Worked great for a mix of my Thule Weekender and my traction boards.
Gabriel (New Mexico) | April 27th, 2020
I got 3 bars. Easy install, absolutely no road noises, very solid build quality, and perfect predrilled hole placements. Holds my Weboost OTR with antenna mount perfectly and solidly. Absolutely no flex where the mount bolts to the cross bar. Exactly what I needed.
cj (AZ) | February 28th, 2020
First off, I received my bars as described during the order process and well packaged! Thank you. The bars installed perfectly to the factory rails (2019 4runner trd off road) with the included hardware. The bars are approximately 1/4" above the factory rails. Materials and finish are first rate. Without question these crossbars are as strong as you could need (they are built very stout with quality material and design). I would venture that the factory rack will fail long before these crossbars. Great product for those not wanting a full new rack and wish to use existing oem rails. Also the rails have points that can be used for attaching hardware and the rail is u shaped so standard ratchet strap hooks should work perfectly. Great purchase, solid equipment. For reference I have use oem racks, yakima, and thule in the past. These crossbars make the oem rack a big step above any of the racks I've used in the past. Nice work.