FJ Cruiser Front Winch Bumper | Strike
Weight: 95 (steel) | 55 (aluminum) (lbs)
Listed weights are with no tubing; single hoops and prerunner tube work add roughly 10 lbs in steel, 5lbs in aluminum; full grill and light protection tubing adds 30 lbs in steel, 15lbs in aluminum.
Ships freight only! Rate calculated at checkout. Please contact us with any questions: https://www.victory4x4.com/CTUS.html
Looking for answers to common questions about us or our products? See our FAQ here.
3 Questions asked on FJ Cruiser Front Winch Bumper | Strike •
Ask us anything
Q Trent • 11/25/2020, 9:59:54 AM What is the weight difference between steel and aluminum versions? Thanks!
A 11/25/2020, 2:45:55 PM Roughly half, the aluminum version is about 50lbs or so.
Q Rob • 08/16/2021, 11:52:45 PM Will the Warn Zeon 10-S winch work with this bumper?
A 09/02/2021, 12:29:40 PM Yes, but you may need to relocate the solenoid box.
Q V • 01/22/2022, 6:25:15 PM Do you have to change the shocks and springs when you install the bumper? I want to get the steel bumper but would like to keep everything else from factory and I'm not planning on lifting or upgrading the shocks and springs on the car. Will I have problems later on? Is the nose of the car going to point down?
A 01/24/2022, 1:43:42 PM The FJ in these photos had a stock suspension and a steel bumper. If you added a winch as well you may need a small lift to stay level.
There are no reviews for this item yet.
Write a Product Review: FJ Cruiser Front Winch Bumper | Strike
Please note: Install videos are meant to be used as a guide, and aren't always the most up to date information on product installation and improvements.
Please be sure to read the PDF installation instructions (if available) as well.