GX Front Bumper | Strike | 460 (10-23)

Victory 4x4

Strike GX Front Winch Bumper | 460 (10-23)

When you need extra tire clearance, maximum protection, plus recovery options for your GX; our Strike Series front bumper is a perfect choice. This made in the USA bumper features an integrated 20" lightbar mount, 3/4" recovery tabs, plus provisions for many industry-standard winches.The bumper is available in a 2 stage satin textured black powder coat over durable zinc primer finish.

CNC cut and formed from .188" steel or .250" aluminum.
Compatible with most 8-10k non-integrated solenoid or removable solenoid winches.
Built-in provisions for standard 3"x3" cube lights.
Built-in provisions for a 20" single row light bar (22" max mounting width)
Not compatible with Onx6 20" Light Bar.
Built-in provisions for parking sensors.
Built-in provisions for turn signals / marker lights (included).
Hardware Included.
Proudly designed and made in the USA.

Listed weights are with no tubing; single hoops and prerunner tube work add roughly 10 lbs in steel, 5lbs in aluminum; full grill and light protection tubing adds 30 lbs in steel, 15lbs in aluminum. (Not all tubing options are available on all bumpers.)

Ships freight only! Rate calculated at checkout. Please contact us with any questions: https://www.victory4x4.com/CTUS.html

Looking for answers to common questions about us or our products? See our FAQ here.

17 Questions asked on GX Front Bumper | Strike | 460 (10-23) • Ask a Question

Ask us anything

Q Brac • 05/18/2021, 10:31:52 PM The weight for the steel option is listed at 160lbs. Is that correct? It looks like the strike bumpers for other vehicles are around 90-110lbs. What makes this one so much heavier? Can you list out the weight difference between no bars and the full bars?

A 05/21/2021, 10:34:23 AM That weight was for the full grille protection option sorry. The base bumper weighs 130 lbs in steel.

Q Reed • 06/04/2021, 1:19:40 PM Where can I find the install directions? Wondering how much cutting is needed, Thanks

A 06/11/2021, 3:00:33 PM Still working on the install video and doc, will be updated on this page when available.

Q Lito Mercado • 07/10/2021, 0:35:12 AM If I ordered this bumper but in aluminum , would you be able to send it to a residential address GX FRONT BUMPER | STRIKE | 460 (10+)

A 07/23/2021, 10:58:16 AM No, the size is the issue, not the weight.

Q Jay Doshi • 09/05/2021, 12:30:18 PM Where were the fog light wires connected to? the cube amber lights? I don't think that was mentioned in the video. Where can I find turn signal lights that fit the provisions on this bumper?

A 09/07/2021, 1:14:21 PM Yes, the fog light harnesses were tied into the cube lights. The turn signal lights are included.

Q Michael Block • 10/13/2021, 11:15:50 PM What is the alloy of the steel or is basic mild steel?

A 10/28/2021, 11:38:26 AM It's A36.

Q Jeff • 10/23/2021, 0:04:41 AM I have a 2021 Lexus GX460. In your video for your strike bumper do the new "cube" fog-lights wire DIRECTLY to the OEM fog-light wiring? If so, which cube-lights do you recommend? And will there be any electrical issues wiring directly to the OEM wires?

A 10/28/2021, 11:56:03 AM We recommend Baja Designs lights. No, no issues. In many cases LED cube lights draw much less power than stock incandescent lamps.

Q David Lindstrom • 12/12/2021, 6:46:59 PM I know there’s a note that a particular light bar isn’t compatible, is there a model that you recommend?

A 12/13/2021, 9:30:55 AM We recommend the Baja Designs S8 20" bar! You can search for it on our site.

Q AJ • 01/17/2022, 12:46:18 PM For the aluminum bumper, is the winch mount steel or aluminum as well?

A 01/18/2022, 10:53:15 AM It is aluminum as well. The fully welded winch plate is gusseted and tied into all structural components of the bumper assembly to create a rigid weldment that spans and reinforces both frame mounting points to eliminate bending and twisting.

Q Paul • 05/31/2022, 2:19:34 AM On 14+, is the wiper fluid resv, relocated? I didn’t see it pictured in your images.

A 06/09/2022, 3:18:46 PM It has not been relocated, no.

Q Ben Davis • 07/27/2022, 2:21:26 PM Does it interfere with the front camera?

A 08/15/2022, 4:41:47 PM With a front camera, we would run the no tube work version.

Q Youcef A • 10/19/2022, 2:38:57 AM Will the Badlands Apex 12k winch fit in this bumper?

A 10/20/2022, 10:16:58 AM Yes, but you may have to relocate the solenoid pack.

Q Matt • 02/03/2023, 5:36:08 PM Are the recovery tabs safe/strong enough to use for snatch straps, winching, etc?

A 02/14/2023, 4:18:03 PM Yes

Q Shayan J • 03/22/2023, 3:56:32 AM Love the bumper. But can i fit a ZEON 12-5 PLATINUM WINCH in there ? I will relocate the solenoid

A 03/30/2023, 2:59:46 PM Yes, if you relocate the solenoid. Although an 8k or 10k is a better fit for the GX and will give you more line speed.

Q Rodrigo • 04/12/2023, 9:48:57 PM Would this light bar fit? (KC C-Series LED 20") It looks like the mounting width is less than 22”, but is the opening too narrow?

A 04/17/2023, 7:24:12 PM That is a double row light bar, our bumper is designed for single row like the Baja Designs S8, Rigid 20" SR, and similar size.

Q Rodrigo Vasquez • 04/24/2023, 2:30:40 PM I'm waiting on this bumper and looking at winch options. I'm leaning toward the Zeon 10-S Platinum. Do I need to relocate the solenoid? Also, does the bumper include provisions for solenoid relocation?

A 05/01/2023, 12:45:33 PM Yes, you will need to relocate the solenoid, but the bumper doesn't have mounting provisions for that since each winch model has its own requirements. The Zeon 10s is a great choice; we have a Warn VR on our shop GX and put the solenoid behind the grille right under the hood latch.

Q Rodrigo Vasquez • 04/29/2023, 3:52:43 PM Are there any winches that do not require solenoid relocation to install? Would a Comeup Seal Slim 9.5k work? Any chance you might complete an install doc? It's been years since this bumper came out, and there still aren't written instructions.

A 05/01/2023, 12:35:23 PM We have not tested that winch. In our experience, all winches will require a remote solenoid.

Q Travis • 05/13/2023, 0:57:41 AM I just installed my strike bumper on my 2020 GX. My two inner parking sensors are alerting as if I'm about to hit something. I believe they're being triggered by the recovery points. Any ideas how to fix this?

A 05/22/2023, 5:22:09 PM Please reach out to our tech support team. [email protected]

Bad Install Directions

★ ★ ★

Pasquale Maggio (NJ) | February 21st, 2023

Bumper looks good but no install directions and the video leaves many things out. I couldn't find a 20 inch light bar that fit and I decided on bending the the brackets out to make one fit after buying 3 separate light bars.

Note From Victory 4x4: Sorry for your hassles with light bars. These bumpers are designed for a 20" bar with a max 22" mounting width. Please let us know if we can help in any way with your install.

GX Front Bumper | Strike | 460 (10-23)

Ask us anything

Write a Product Review: GX Front Bumper | Strike | 460 (10-23)

Related Products