Rotopax/Maxtrax Carrier | Adventure Carrier

Rotopax/Maxtrax mount for the Victory 4x4 Adventure Carrier.

Mount a Rotopax* or FuelPax* & Maxtrax (or other tread boards) at the same time
Coated in a 2 stage satin textured black powder coat over durable zinc primer finish
Traction boards will require tread board supplied hardware or (1) qty Recovery Board Accessory Mount Bolt Pack (TRACBO-BP)
Bolt-on installation

*Does not fit 3 or 4 gallon Rotopax (1 - 2 gallon will work).

*Any FuelPax, 1 - 4.5 gallon.

Looking for answers to common questions about us or our products? See our FAQ here.

19 Questions asked on Rotopax/Maxtrax Carrier | Adventure Carrier • Ask a Question

Ask us anything

Q Kire Oltim • 01/22/2021, 6:23:22 PM Can this bracket be mounted onto the dual jerry can holder. I see the 90deg lip, hoping that the holes will correspond to your dual jerry can holder for maxtrax or a propane bottle holder?

A 01/25/2021, 12:06:24 PM They were not designed as such, although they may fit by drilling some holes.

Q Peter Rosenberg • 01/28/2021, 2:36:14 AM Can this be mounted to the 5th Gen 4runner hatch ladder?

A 02/02/2021, 12:30:16 PM We don't recommend that much weight on the hatch ladder while driving.

Q Adam Bodkins • 02/09/2021, 9:46:33 PM With using through bolts would you be able to mount 2 4gal rotopax on each side of the bracket ? Essential sandwiching the plate between two rotopax mounts on top and bottom ?

A 02/15/2021, 12:52:47 PM In theory it would work, but since our mount it designed to mount one mount only, you would probably have to drill some holes to offset the other pack mount lower or higher to bolt them both on.

Q Mitch Klann • 02/26/2021, 1:53:16 PM Can you specify which rotopax mount is used to attach the 4 gallon rotopax to your plate? Also, it looks like the Maxtrax is mounted to the plate with bolts and wingnuts? Is that correct?

A 03/01/2021, 3:13:17 PM You can use the Standard or locking Pack Mount, yes. The mount doesn't include hardware to mount traction boars, but yes; you can just use carriage bolts, some spacers, and wing nuts.

Q Mitch Klann • 03/01/2021, 10:09:34 PM In order to properly support the 4 gallon rotopax on the rotopax mount, does it require 1 or 2 pack mounts? I got the rotopax and it has locations for 3. Thanks.

A 03/05/2021, 9:52:24 AM It looks like the page was incorrect, sorry for the confusion. The 4 gallon RotopaX has a much wider mounting pattern. Does not fit 3 or 4 gallon RotopaX (1 - 2 gallon will work). Compatible with any FuelpaX, 1 - 4.5 gallon.

Rotopax/Maxtrax Carrier | Adventure Carrier

Ask us anything

Write a Product Review: Rotopax/Maxtrax Carrier | Adventure Carrier