Description

Roof Rack | Short | Evolution Series | Toyota 4Runner 6th Gen (25+)

Your 4Runner runs out of room quickly once recovery gear and camp kit go in, but you may not want a rack covering the whole roofline. The Evolution Series short rack gives you a strong, secure platform up top in a lighter, more open footprint, so your gear has a place to go and the cabin stays open.

Strength comes from layered side rails, a 3/16" aluminum inner rail backed by a 1/8" outer layer, which carry a 1000 lb static rating while keeping the whole rack at just 35 lbs. Versatility comes from milled t-nut drop-in spots, so lights, awnings, tents and recovery boards bolt on wherever you need them.

You also choose the look. Stealth Black gives you a clean profile that matches your factory trim, while Signature Silver Accents finishes the outer rail layer in textured silver for the Victory style that stands out at the trailhead.

Victory 4x4 has built over 10,000 roof racks in Kalamazoo since 2019, and every one is made to order by the team that designed it.

Built Strong

• Layered side rails with a 3/16" inner rail and 1/8" outer layer, laser cut from aluminum for rigidity without the weight of steel

• 1000 lb static rating, enough for a roof top tent and the people sleeping in it

• Steel mounts made for the 6th Gen 4Runner for a direct, secure fit

• Powder coated crossbars that won't fade or turn purple in the sun the way anodized finishes can

Built to Adapt

• Milled t-nut drop-in spots let you add t-slot hardware without pulling the crossbars, so you can mount gear anywhere along the rack

• Fits roof top tents, awnings, recovery boards, lighting and our full line of rack accessories

• Two finishes so the rack matches the build you have in mind

Built to Last

• Black stainless hardware included, ready to install out of the box

• Full bolt-on install with no drilling

• Lifetime warranty against material, manufacturing and design defects

Accessories & Add-Ons

Build out your setup with the 4Runner Side Accessory Panel, Roof Top Tent Mounting Brackets, Awning & Accessory Mounts, Platform Panels and the Roof Rack LED Light Kit. Everything bolts straight to the rack's crossbars using standard t-slot hardware. Need extra hardware for more accessories? Grab the T-Slot Nut and Stud Kit (set of 12), or the T-Slot Nut and Bolt Kit and T-Slot Stud Kit. Browse roof rack accessories →

Fitment & Notes

• Fits 6th Gen 4Runner (2025+)

• Your sunroof tilts and slides normally with the rack installed

• The rack sits 2.5" above the highest point of the roof

• We recommend paint protection film under the front and rear fairings where they touch the vehicle, so trail dust can't scratch the paint over time

• See full warranty details here.