Description
Land Cruiser Full Roof Rack | Evolution Series | 250 Series (24+)
✓ Vehicle: 2024+ Toyota Land Cruiser (250 Series)
✓ Finish: Stealth Black or Signature Silver Accents, satin textured powder coat
✓ Material: Laser cut aluminum side rails, 3/16" inner with 1/8" outer layer
✓ Rack Dimensions: 92" x 47.5" x 2.5"
✓ Weight: 42 lbs
✓ Load Rating: 300 lbs Dynamic / 1000 lbs Static
✓ Warranty: Limited Lifetime
✓ Made in USA: Made to order in Kalamazoo, Michigan
Your Land Cruiser runs out of room quickly once recovery gear, camp kit and a cooler go in, and a roof top tent needs a platform you can trust overnight. The Evolution Series gives you that platform with a strong, low-profile rack that grows with your build, so your gear rides up top and the cabin stays open.
Strength comes from layered side rails, a 3/16" aluminum inner rail backed by a 1/8" outer layer, which carry a 1000 lb static rating while keeping the whole rack at just 42 lbs. Versatility comes from milled t-nut drop-in spots and a convertible front fairing, so lights, awnings, tents and recovery boards bolt on wherever you need them.
You also choose the look. Stealth Black gives you a clean profile that matches your factory trim, while Signature Silver Accents finishes the outer rail layer in textured silver for the Victory style that stands out at the trailhead.
Victory 4x4 has built over 10,000 roof racks in Kalamazoo since 2019, and every one is made to order by the team that designed it.
Built Strong
Layered side rails with a 3/16" inner rail and 1/8" outer layer, laser cut from aluminum for rigidity without the weight of steel
1000 lb static rating, enough for a roof top tent and the people sleeping in it
Steel mounts made for the 250 Series Land Cruiser for a direct, secure fit
Powder coated crossbars that won't fade or turn purple in the sun the way anodized finishes can
Built to Adapt
Milled t-nut drop-in spots let you add t-slot hardware without pulling the crossbars, so you can mount gear anywhere along the rack
Convertible front fairing that sits raised for a finished look or drops down for a 40" single-row light bar
Fits roof top tents, awnings, recovery boards, lighting and our full line of rack accessories
Two finishes so the rack matches the build you have in mind
Built to Last
Black stainless hardware included, ready to install out of the box
Full bolt-on install with no drilling
Limited lifetime warranty against material, manufacturing and design defects
Accessories & Add-Ons
Build out your setup with the Land Cruiser Side Accessory Panel, Roof Top Tent Mounting Brackets, Awning & Accessory Mounts, Platform Panels and the Roof Rack LED Light Kit. Everything bolts straight to the rack's crossbars using standard t-slot hardware. Need extra hardware for more accessories? Grab the T-Slot Nut and Stud Kit (set of 12), or the T-Slot Nut and Bolt Kit and T-Slot Stud Kit. Browse roof rack accessories →
Fitment & Notes
Fits 2024+ Toyota Land Cruiser (250 Series)
Your sunroof tilts and slides normally with the rack installed
The rack sits 2.5" above the highest point of the roof
The light bar cutout version includes light bar mounting brackets. The cutout fairing fits a single-row LED light bar up to 41.25" lens housing width, and bars up to 43.5" (mounting stud width) fit with our mounts after trimming the fairing
We recommend paint protection film under the front and rear fairings where they touch the vehicle, so trail dust can't scratch the paint over time
See full warranty details here.
