GX Rear Window MOLLE Panel | 460 & 470 (03+)
★★★★★ ★★★★★ 5.00/5 Stars. (2 Reviews)
Looking for answers to common questions about us or our products? See our FAQ here.
7 Questions asked on GX Rear Window MOLLE Panel | 460 & 470 (03+) •
Ask us anything
Q Bryan Brosseau • 04/11/2020, 10:25:25 AM What model years does this fit? 2020?
A 04/17/2020, 6:07:22 PM All GX460s
Q Alonso • 09/02/2020, 1:58:41 PM I have a 2003 Toyota Sequoia. Is it possible to fit this product (or any others you carry) for the 1st gen sequoias? don't need it to look perfect
A 09/09/2020, 3:00:07 PM We don't have anything for a Sequoia at this time.
Q Joseph • 09/14/2020, 11:28:52 AM Do you guys have an install instruction sheet for the GX470? Trying to figure out if I’m drilling into the frame for the anchors or if I’m bolting behind the plastic paneling. Thanks!
A 09/24/2020, 11:01:43 AM GX470 instructions are included in the back of the install document linked on the product page. If you have any further questions, please feel free to reach out to us.
Q Jose • 12/07/2020, 0:43:06 AM Do you have a youtube instructional for the GX470? Can I still use my third row seats? Are you able to powdercoat them a different color? Thank you.
A 12/10/2020, 11:32:27 AM Please see the instructions link on the product page; yes, it will work with the third row; sorry, we only offer black powdercoat.
Q JEFFREY • 01/26/2021, 1:28:41 PM Does the GX REAR WINDOW MOLLE PANEL | 460 also fit on the drivers side window?
A 02/02/2021, 12:30:16 PM Yes it does.
Q James • 03/07/2021, 1:51:02 PM With the rear window molle can you still use the 3rd row seats?
A 03/08/2021, 1:18:58 PM We advise against running these panels with third-row passengers, as it could affect the path of the third row side curtain airbags when equipped.
Q Richard Delgado • 04/29/2021, 2:49:01 PM Does it fit a 2001 Subaru Outback?
A 05/05/2021, 1:00:12 PM It does not.
5.00/5 Stars out of 2 Reviews
Write a Product Review: GX Rear Window MOLLE Panel | 460 & 470 (03+)
Brandon Harris (Chicago, IL) | May 10th, 2021
MOLLE panel arrived in great condition and with all needed hardware. The problem I ran into was watching the 460 installation video and assuming it would be roughly the same for my GX 470. This is not correct. There is a link to PDF instructions for the GX 470. READ THEM. For someone who is a relative novice at working on car interiors the 470 installation is probably an order of magnitude more difficult. That being said, I didn't know what the heck I was doing, and I still managed to do it in 90 minutes, including a trip to the hardware store for a step drill bit (which you will need, assuming you don't own a 1/2" drill bit). You'll also need a trim removal kit, and in my case I had to break out my 1/2" impact wrench to get the 3rd row seatbelt bolt back in. Overall the product is great quality, just like the other Victory products. I would suggest Victory do a video for the 470 installation as the GX 460 video doesn't accurately represent the level of effort required to install this item.
R2M (San Clemente, CA) | December 11th, 2019
Purchased two units for my overland GX460. They are awesome! Love them! I have a 3,000 Watt inverter I was able to mount on it along with a 100ft extension cord, recovery gear, IFAK, miscellaneous tools and equipment. Since the Army has a new camo pattern (old was digital ACU, new is OCP/Scorpion and I'm Army reservist), I had to get all new OCP gear, so I used all my old ACU load-out MOLLE for these racks. PRO's: - People who've seen them love them and ask where I purchased them. - Very easy install, about 15 minutes per side. Victory install YouTube video was great in getting them done quickly. - Very solid feeling. - Gets a lot of gear off the rear deck to allow space. Frees up the floor space for fridge, Pelican case of other camping gear, e.g.: chainsaw, maul, table, chairs, etc. Basically all my other overland gear that I don't keep in my rig all the time. - Still allows for the third row seats to be used, albeit, with my load-out, these seats have to stay flat now. I have a build thread on IH8MUD here: https://forum.ih8mud.com/threads/r2m-2013-gx460-overland-build.1104719/ I will be posting photos of these racks mounted very soon. CON's: None that I've come across yet. SUGGESTION: How about a MOLLE rack that stretches across the top rear, maybe from left top grab handle to top right grab handle? I could find a few more things to hang on that also!
Note From Victory 4x4: Thanks for the review and the suggestions!
Please note: Install videos are meant to be used as a guide, and aren't always the most up to date information on product installation and improvements.
Please be sure to read the PDF installation instructions as well.