• Victory 4x4
    0

    Highlander Roof Rack | 3rd Gen (2014-2019)

    5.0 · 3 ratings
    • Highlander Roof Rack | 3rd Gen (2014-2019)
    • Highlander Roof Rack | 3rd Gen (2014-2019)
    • Highlander Roof Rack | 3rd Gen (2014-2019)
    • Highlander Roof Rack | 3rd Gen (2014-2019)
    • Highlander Roof Rack | 3rd Gen (2014-2019)
    • Highlander Roof Rack | 3rd Gen (2014-2019)
    Fit at a Glance More questions? See the FAQ
    Fits
    2014-2019 3rd Gen Toyota Highlander (not the panoramic roof)
    Load
    300 lbs dynamic, 800 lbs static
    Install
    Bolt-on, no drilling
    Install Time*
    Home: 1 day · Shop: 3 to 4 hr
    *Times are estimates and vary with vehicle condition and installer skill.
    $997.90
    Regular
    $1,174.00
    Black Friday All Month Sale – Save $176.10
    $14.95 Flat Rate Shipping

    Code: VHRK | Weight: 60 (lbs)



        Specs
        Vehicle2014-2019 Toyota Highlander (3rd Gen)
        Material3/16" aluminum with steel mounting brackets and extruded aluminum rails
        FinishSatin textured black powder coat over zinc primer
        Load Rating300 lbs Dynamic / 800 lbs Static
        WarrantyLimited Lifetime
        Made inUSA

        Need to haul gear that doesn't fit inside your Highlander, or ready to add more cargo capacity? This roof rack gives you a solid, secure place to mount almost anything up top, so your gear has a place to go and your interior stays free for the essentials.

        This rack is built from extruded aluminum rails with steel mounting brackets, giving you the strength you need without adding unnecessary weight. Milled T-nut access points run the length of the rack, so you can mount gear anywhere along the top, and easy bolt-together installation means no drilling into your roof.

        Features
        • Laser cut and formed from 3/16" aluminum with steel mounting brackets and extruded aluminum rails for lasting strength
        • Milled T-nut access points let you mount gear anywhere along the rack
        • Easy bolt-together installation, no drilling required
        • Sunroof tilt and slide features still work with the rack installed (does not work with panoramic roof)
        • Fairing edge trim included
        • Available with or without a 40" light bar cutout (light bar not included)
        • Hardware included
        • Paint protection film, anti-seize and Ultra Black sealant included
        • Made in the USA
        Accessories & Add-Ons

        Extra Mounting Hardware
        Need extra hardware for more accessories? Grab the T-Slot Nut and Stud Kit (set of 12), or the T-Slot Nut and Bolt Kit and T-Slot Stud Kit.

        Fitment & Notes
        • Fits 3rd Gen Toyota Highlander (2014-2019)
        • Rated for 300 lbs dynamic load (while driving) and 800 lbs static load (when parked), evenly distributed across the rack
        • Light bar cutout version includes light bar mounting brackets. Cutout fairing fits a 41.25" max lens housing width single-row LED light bar; bars up to 43.5" (mounting stud width) will fit with our mounts, but trimming the fairing is required
        • We recommend applying paint protection film under the front and rear fairings where they contact the vehicle, to prevent dirt and debris from scratching paint over time
        • Backed by a limited lifetime warranty against material, manufacturing, and design defects. See our warranty page for full details

        A quick note on weight ratings:
        These are a guide, not a replacement for your vehicle's manufacturer roof load limits or GVWR, so check your owner's manual first. Added weight changes handling, especially off-road or in an emergency maneuver, so load smart. As with any modification, you're responsible for how it's installed, loaded, and used.


        Made in USA

      What comes with the roof rack besides the hardware?
      Every rack includes paint protection film for the contact points, anti-seize for the bolts and Ultra Black sealant for the roof mounts, so you have everything you need for a clean, protected install.

      Which Highlanders does it fit?
      It fits the 3rd Gen Toyota Highlander, 2014 to 2019.

      Does my sunroof still work?
      Yes, the sunroof tilt and slide features still work with the rack installed. It does not work with the panoramic roof.

      How much weight can it carry?
      It is rated for 300 lbs dynamic (while driving) and 800 lbs static (when parked), evenly distributed across the rack.

      Do I need to drill?
      No. The rack bolts together with no drilling into your roof, and all hardware is included.

      Can I run a light bar?
      Yes. Choose the 40" light bar cutout version, which includes light bar mounting brackets. The fairing fits a single-row bar up to 41.25" lens housing width, and bars up to 43.5" mounting stud width fit with trimming of the fairing. Light bar not included.

      How do I mount gear?
      Milled T-nut access points let you mount gear anywhere along the rack, and the T-Slot Nut and Stud Kit adds more mounting points. Cargo boxes mount right to the crossbars, since Thule box clamps pinch the crossbar and Yakima grippers wrap around it.

      Do you offer black hardware?
      Yes, black stainless hardware is available as an add-on.

      Will the fairings scratch my paint?
      We recommend paint protection film under the front and rear fairings where they touch the vehicle, so dirt and debris can't scratch the paint over time. Fairing edge trim is included.

      Still have a question about fit?Talk with the team that builds it, right here in Kalamazoo. Mon to Fri, 8:30 AM to 4:30 PM ET.

      Customer Reviews

      5.0
      3 ratings · 3 written
      5★3
      4★0
      3★0
      2★0
      1★0
      May 4, 2023

      Excellent Roof Rack

      This is a great product that definitely makes your vehicle not only stand out but ultimately and most importantly more useful. Unfortunately there are very few aftermarket upgrade options available for the HL and I appreciate Victory 4x4 offering this. Awesome that each crossbar has an integrated track for sliding bolts into so you can mount literally anything to them, very handy design that i didn't expect. Install is very straightforward, I did it myself with ease. Only thing I did differently was use the OEM rubber screw bases for the mounting holes instead of the suggested silicone sealer. I plan on using this for mounting our rooftop tent and looking forward to years of enjoyment with this piece of gear.

      Stephen
      Response from our team

      Thanks for the review Stephen!

      Oct 12, 2022

      Badass upgrade for the Highlander

      This roof rack is well built. There are no rough edges, the components all fit together seamlessly, and the powdercoated finish is smooth with even coverage. It fits the Highlander perfectly and gives it a more rugged, substantial look. It looks and feels like quality, and I expect it to last for years. I watched the video tutorial and assembled and installed it myself, with only help lifting it onto the roof. I can't wait to start adding accessories!

      Sara
      Nov 25, 2021

      roof tent

      Hello, we have existing roof bar in our 2018 highlander xle, questions are.
      1. can i replace it with this one?
      2. can it handle a 2person roof tent?

      Armando

      Reviews come from our customers. Buyers are invited to rate their parts after their order ships, and those reviews are marked Verified Buyer. We publish positive and negative reviews alike.

      No customer photos yet. Got this part on your rig? Be the first to show it off.



      ACCESSORY MOUNTS

      A wide variety of accessory / lighting mounts available and the list is growing!

      See related products below!



      SUNROOF COMPATIBLE

      Allows for full functionality of all standard sunroofs



      BUILT FOR ADVENTURE

      Designed with your outdoor gear in mind.