Tacoma Hood Antenna Mount | 3rd Gen (16+)

★★★★★ ★★★★★ 4.69/5 Stars. (13 Reviews)
  • Tacoma Hood Antenna Mount | 3rd Gen (16+)
  • Tacoma Hood Antenna Mount | 3rd Gen (16+)
  • Tacoma Hood Antenna Mount | 3rd Gen (16+)
  • Tacoma Hood Antenna Mount | 3rd Gen (16+)
  • Tacoma Hood Antenna Mount | 3rd Gen (16+)

Price:
$49.00
Now:
$41.65

 

Code: VT3CB-BARE

Weight: 1 (lbs)


Free Shipping!



    Communication is key, and this is a great place to mount a HAM, GMRS, or CB antenna to your Toyota Tacoma.

    Designed to use 3/8 hole, thick NMO mounts like the Laird Technologies Part #: MABTO or the PCTEL Part #: BMATM3-NC, among others.

    Laser cut from .190 thick aluminum, uncoated to allow for an electrical ground. Must use an NMO style antenna.

    Works on either side of the vehicle.

    Ships free USPS.

    Antennas emit radiation. You are responsible for making sure that your setup stays within safe levels. These levels can vary based on output power, antenna gain, and your distance from the antenna when transmitting. We are not responsible for doing this research or evaluating the safety of your setup.
    More information provided by the FCC can be found here: https://transition.fcc.gov/bureaus/oet/info/documents/bulletins/oet65/oet65b.pdf

    21+ Tacomas require the bracket to be mounted between the hood hinge and the hood. This will space the hood up slightly.

Looking for answers to common questions about us or our products? See our FAQ here.

17 Questions asked on Tacoma Hood Antenna Mount | 3rd Gen (16+)

Ask us anything



Q Andreas • 12/24/2020, 10:56:20 PM Would this fit a 5gen 4Runner as well?
A 12/30/2020, 4:56:07 PM It does not.
Q Aaron • 02/08/2021, 1:19:56 PM Does your antenna hit the windshield when you open the hood?
A 02/15/2021, 12:52:47 PM It does not.
Q Bill • 02/20/2021, 4:09:10 PM Do you have similar option for a 2015 Tacoma?
A 03/01/2021, 3:13:17 PM Nothing yet, no.
Q Scott Putnam • 03/31/2021, 7:04:10 PM Are you limited as to the length or type of the antenna you can mount to the bracket? The reason for my question is that it would appear that when the hood opens, I would think the antenna would come into contact with the windshield? Thank you
A 04/02/2021, 1:17:54 PM An antenna of any length does not hit the windshield.
Q Jon • 04/06/2021, 1:41:22 PM Will it work on my 2020 Tundra? If not, can it be modified? Or do you sell one?
A 04/12/2021, 1:13:17 PM We don't offer one for the Tundra at this time.
Q buckeye43210 • 05/04/2021, 11:07:59 PM Will this work with a 2020 RAV4?
A 05/05/2021, 1:19:38 PM No
Q Josh Embrey • 05/06/2021, 12:23:29 PM What is the total length? What is the distance between hood bolt holes (center to center)? I’m trying to figure out whether I can make it work for my 2010 GX460 or not.
A 05/12/2021, 2:02:55 PM It will not fit the GX.
Q Scott Schliephake • 05/25/2021, 1:39:08 PM So no concerns for thread engagement of the factory bolt into the hood by reducing that engagement by 0.190"? Hard to tell by the video how many turns the bolt engagement there was remaining. Thanks.
A 06/04/2021, 10:30:55 AM No issues.
Q Stephen K • 06/21/2021, 3:51:53 PM Installed easily on 2021 TRD Pro, bracket itself only took about 5 minutes. Have you come up with a solution to the non-perpendicular angle? It's canted forward by 7-10 degrees, but I would prefer the antenna to be perpendicular. Thank you.
A 06/25/2021, 12:04:58 PM You could leave it as is, or put a slight bend in it by hand once it's mounted.
Q Will • 07/21/2021, 3:33:25 PM does this work with the midland MXTA25 3dB Gain Ghost Antenna?
A 07/23/2021, 11:15:25 AM Yes, if you use one of the NMO mounts we specify in the description.
Q Doug • 09/25/2021, 3:15:02 PM Will this fit a 2020 Toyota Highlander?
A 09/28/2021, 3:15:44 PM It will not.
Q Matt McKay • 10/07/2021, 8:41:38 PM Does this work with the antenna that comes with the Midland mxt400 antenna?
A 10/18/2021, 4:48:42 PM It's designed to use 3/8" hole, thick NMO mounts like the Laird Technologies Part #: MABTO or the PCTEL Part #: BMATM3-NC, among others.
Q Adam • 10/12/2021, 5:57:36 PM Does it give a good ground? I've seen some people get a separate wire to ground on another location.
A 10/18/2021, 4:48:09 PM Yes, it is uncoated to allow for a good ground.
Q Darrell • 10/23/2021, 9:14:49 AM Will this work with a Firestik antenna and a Fire-ring cable?
A 10/28/2021, 11:56:03 AM Yes, should not be an issue. Would recommend a short firestick however.
Q Chris • 11/03/2021, 3:38:40 PM Can you post links to where to purchase these Laird Technologies Part #: MABTO or the PCTEL Part #: BMATM3-NC? After searching for a while even on the Laird site I am not finding them.
A 11/05/2021, 10:43:17 AM Search for 'Laird Technologies MABTO' or 'PCTEL BMATM3-NC' online and you should find them. They don't seem to be directly on Laird's website.
Q Billie • 01/08/2022, 5:08:55 PM You mention needing to solder an NMO base on the bracket for GMRS radios. Can you elaborate, please?
A 01/12/2022, 11:00:59 AM Some of the NMO mounts need to have the cable soldered to them to terminate, some come with the cable installed. This really just affects how you route the cable.
Q DeEstan • 02/28/2022, 10:25:19 PM Will this work with Weboost antenna?
A 03/04/2022, 2:04:39 PM We haven't tried that specifically.
Currently Viewing Reviews with a rating of 4. Click here to reset.
★★★★★ ★★★★★
4.69/5 Stars out of 13 Reviews
5
11
4
1
3
0
2
1
1
0
A very simple design. Keep it simple
(New York) | June 21st, 2021
These things are great. Super simple. Easy to instal. The only issue I had was that I had to trim some of the weather stripping on the cowl under the windshield so that the mount sat flat, otherwise, the antenna was leaning forward. But other than that, I would buy these again. I bought two. One for a dual band ham antenna and one for a gmrs ghost antenna.

Please note: Install videos are meant to be used as a guide, and aren't always the most up to date information on product installation and improvements.
Please be sure to read the PDF installation instructions as well.



Related Products