Description
Roof Rack | Toyota Sequoia 1st & 2nd Gen (01-22)
✓ Vehicle: 2001-2022 Toyota Sequoia (1st & 2nd Gen)
✓ Finish: 2nd Gen in Stealth Black or Signature Silver Accents, 1st Gen in Stealth Black, satin textured powder coat
✓ Material: 2nd Gen uses laser cut aluminum side rails, 3/16" inner with 1/8" outer layer
✓ Rack Dimensions: 90.5" x 47.5" (1st Gen) / 94" x 54.5" (2nd Gen)
✓ Weight: 58 lbs
✓ Load Rating: 300 lbs Dynamic / 800 lbs Static
✓ Warranty: Lifetime
✓ Made in USA: Made to order in Kalamazoo, Michigan
Your Sequoia runs out of room quickly once recovery gear, camp kit and a cooler go in, and a roof top tent needs a platform you can trust overnight. This rack gives you that platform with a strong, low-profile rack that grows with your build, so your gear rides up top and the cabin stays open.
On the 2nd Gen rack, strength comes from layered side rails, a 3/16" aluminum inner rail backed by a 1/8" outer layer. Both generations carry an 800 lb static rating, and milled t-nut drop-in spots plus a convertible front fairing let lights, awnings, tents and recovery boards bolt on wherever you need them.
2nd Gen owners also choose the look. Stealth Black gives you a clean profile that matches your factory trim, while Signature Silver Accents finishes the outer rail layer in textured silver for the Victory style that stands out at the trailhead. The 1st Gen rack comes in Stealth Black.
Victory 4x4 has built over 10,000 roof racks in Kalamazoo since 2019, and every one is made to order by the team that designed it.
Built Strong
2nd Gen racks use layered side rails with a 3/16" inner rail and 1/8" outer layer, laser cut from aluminum for rigidity without the weight of steel
800 lb static rating, enough for a roof top tent and the people sleeping in it
Steel mounts made for the 1st and 2nd Gen Sequoia for a direct, secure fit
Powder coated crossbars that won't fade or turn purple in the sun the way anodized finishes can
Built to Adapt
Milled t-nut drop-in spots let you add t-slot hardware without pulling the crossbars, so you can mount gear anywhere along the rack
Convertible front fairing that sits raised for a finished look or drops down for a 40" single-row light bar
Fits roof top tents, awnings, recovery boards, lighting and our full line of rack accessories
Two finishes on the 2nd Gen rack so it matches the build you have in mind
Built to Last
Hardware included, with black stainless hardware available as an upgrade
Full bolt-on install with no drilling
Lifetime warranty against material, manufacturing and design defects
Accessories & Add-Ons
Build out your setup with the Roof Top Tent Mounting Brackets, Awning & Accessory Mounts, Platform Panels and the Roof Rack LED Light Kit. Everything bolts straight to the rack's crossbars using standard t-slot hardware. Need extra hardware for more accessories? Grab the T-Slot Nut and Stud Kit (set of 12), or the T-Slot Nut and Bolt Kit and T-Slot Stud Kit. Browse roof rack accessories →
Fitment & Notes
Fits 1st Gen Toyota Sequoia (2001-2007) and 2nd Gen Toyota Sequoia (2008-2022)
Your sunroof tilts and slides normally with the rack installed
The rack sits 2.5" above the highest point of the roof
The light bar cutout version includes light bar mounting brackets. The cutout fairing fits a single-row LED light bar up to 41.25" lens housing width, and bars up to 43.5" (mounting stud width) fit with our mounts after trimming the fairing
We recommend paint protection film under the front and rear fairings where they touch the vehicle, so trail dust can't scratch the paint over time
See full warranty details here.
