Roof Rack | Toyota Sequoia 1st & 2nd Gen (01-22)
✓ Vehicle: 2001-2022 Toyota Sequoia (1st & 2nd Gen)
✓ Finish: 2nd Gen in Stealth Black or Signature Silver Accents, 1st Gen in Stealth Black, satin textured powder coat
✓ Material: 2nd Gen uses laser cut aluminum side rails, 3/16" inner with 1/8" outer layer
✓ Rack Dimensions: 90.5" x 47.5" (1st Gen) / 94" x 54.5" (2nd Gen)
✓ Weight: 58 lbs
✓ Load Rating: 300 lbs Dynamic / 800 lbs Static
✓ Warranty: Limited Lifetime
✓ Made in USA: Made to order in Kalamazoo, Michigan
Your Sequoia runs out of room quickly once recovery gear, camp kit and a cooler go in, and a roof top tent needs a platform you can trust overnight. This rack gives you that platform with a strong, low-profile rack that grows with your build, so your gear rides up top and the cabin stays open.
On the 2nd Gen rack, strength comes from layered side rails, a 3/16" aluminum inner rail backed by a 1/8" outer layer. Both generations carry an 800 lb static rating, and milled t-nut drop-in spots plus a convertible front fairing let lights, awnings, tents and recovery boards bolt on wherever you need them.
2nd Gen owners also choose the look. Stealth Black gives you a clean profile that matches your factory trim, while Signature Silver Accents finishes the outer rail layer in textured silver for the Victory style that stands out at the trailhead. The 1st Gen rack comes in Stealth Black.
Victory 4x4 has built over 10,000 roof racks in Kalamazoo since 2019, and every one is made to order by the team that designed it.
Built Strong
2nd Gen racks use layered side rails with a 3/16" inner rail and 1/8" outer layer, laser cut from aluminum for rigidity without the weight of steel
800 lb static rating, enough for a roof top tent and the people sleeping in it
Steel mounts made for the 1st and 2nd Gen Sequoia for a direct, secure fit
Powder coated crossbars that won't fade or turn purple in the sun the way anodized finishes can
Built to Adapt
Milled t-nut drop-in spots let you add t-slot hardware without pulling the crossbars, so you can mount gear anywhere along the rack
Convertible front fairing that sits raised for a finished look or drops down for a 40" single-row light bar
Fits roof top tents, awnings, recovery boards, lighting and our full line of rack accessories
Two finishes on the 2nd Gen rack so it matches the build you have in mind
Built to Last
Hardware included, with black stainless hardware available as an upgrade
Full bolt-on install with no drilling
Limited lifetime warranty against material, manufacturing and design defects
Accessories & Add-Ons
Build out your setup with the Roof Top Tent Mounting Brackets, Awning & Accessory Mounts, Platform Panels and the Roof Rack LED Light Kit. Everything bolts straight to the rack's crossbars using standard t-slot hardware. Need extra hardware for more accessories? Grab the T-Slot Nut and Stud Kit (set of 12), or the T-Slot Nut and Bolt Kit and T-Slot Stud Kit. Browse roof rack accessories →
Fitment & Notes
Fits 1st Gen Toyota Sequoia (2001-2007) and 2nd Gen Toyota Sequoia (2008-2022)
Your sunroof tilts and slides normally with the rack installed
The rack sits 2.5" above the highest point of the roof
The light bar cutout version includes light bar mounting brackets. The cutout fairing fits a single-row LED light bar up to 41.25" lens housing width, and bars up to 43.5" (mounting stud width) fit with our mounts after trimming the fairing
We recommend paint protection film under the front and rear fairings where they touch the vehicle, so trail dust can't scratch the paint over time
See full warranty details here.
Which vehicles does it fit?
It fits the 1st Gen (2001-2007) and 2nd Gen (2008-2022) Toyota Sequoia.
How big is it?
About 90.5" x 47.5" for the 1st Gen and 94" x 54.5" for the 2nd Gen, at around 58 lbs.
How much weight can it hold?
It is rated for 300 lbs dynamic (while driving) and 800 lbs static (when parked), evenly distributed.
Will my sunroof still work?
Yes. The rack sits about 2.5" above the roof, so the sunroof still works.
What finishes are available?
The 2nd Gen comes in Stealth Black or Silver Accents. The 1st Gen comes in Stealth Black only.
Will the fairing scratch my paint?
We recommend paint protection film where the fairings touch the vehicle.
I have a 2018 Platinum. I have done research on a few different roof rack systems for my truck. Ended up going with this one and I love it!! Install was super easy! They have a video for the install which in my opinion is WAY BETTER than trying to figure out a piece of paper for instructions. Only thing I didn't like was how it was packaged but luckily the materials are sturdy and overall it looks awesome! Well done Victory4x4!!
Finally installed my rack a few weeks ago and thought I'd right a review for yall. Over all I am happy with it. However I do wish it would have a sleeker design up front, like it's competitor. Also the cut out stamping on the mounting brackets was not well thought out. The stamping could have been placed on the elevated section of those steel plates. Some of those part number cut outs left a big need for more RTV to placed on them to avoid leakage. Also mine was missing a few screws so be sure to count out all our parts before you start. Pictures available.
Reviews come from our customers. Buyers are invited to rate their parts after their order ships, and those reviews are marked Verified Buyer. We publish positive and negative reviews alike.
A wide variety of accessory / lighting mounts available and the list is growing!
See related products below!
Allows for full functionality of all standard sunroofs
Designed with your outdoor gear in mind.
