4Runner Front Winch Bumper | Blitz | 5th Gen (10+)
★★★★★ ★★★★★ 5.00/5 Stars. (12 Reviews)
- Blitz Slim 4Runner Front Winch Bumper | 5th Gen (2010+)
- CNC cut and formed from .188" steel.
- Tubework option includes 1.75" x .120" tubework for added grill protection.
- Compatible with most 8-10k non-integrated solenoid or removable selenoid winches.
- Some integrated winches will fit with a slight power steering return hose modification or reroute (See install video.)
- Built in provisions for a 20" light bar (22" max mounting width)
- Proudly designed and made in the USA.
- Free Shipping!
- Does not fit 14+ Limited trim 4Runners
- 10-13 Trail will require trimming or removing trail front valence.
- Tubework version compatibility with Toyota Safety Sense equipped vehicles not guaranteed.
- The sensor may be located behind, or it's vision prohibited by the tubework based on grille model.
Our Blitz winch bumper for the 5th generation Toyota 4Runner is designed to integrate with your factory front bumper fascia for a clean look with maximum recovery options. This made in the USA bumper features an integrated 20" lightbar mount, 3/4" recovery tabs, plus provisions for many industry standard winches. Available with optional tubework for extra front end protection. A fairlead block off plate is included for those that don't yet have, or need, a winch. The bumper is available in a 2 stage satin textured black powdercoat over durable zinc primer finish, or in bare metal.
Looking for answers to common questions about us or our products? See our FAQ here.
9 Questions asked on 4Runner Front Winch Bumper | Blitz | 5th Gen (10+) •
Ask us anything
Q GG • 03/30/2020, 7:47:11 PM Would we be able to have an option for a 30" BD S8?
A 04/06/2020, 1:46:00 PM These fit 20" bars only.
Q Julio Benitez • 04/01/2020, 8:41:41 AM Is the tubework version compatible with the 2020 4runer toyota safety sense? (sensor in the lower stock bumper grill)
A 04/06/2020, 2:43:37 PM No, we do not recommend running any tubework with the front radar.
Q Adrian • 04/03/2020, 4:14:00 PM Will you be offering any high clearance additions for this bumper in the future?
A 04/06/2020, 2:43:37 PM This bumper was not designed to be added on to. Please see our Strike Bumper part number V4R5FS for more options. (https://www.victory4x4.com/product/V4R5FS.html)
Q Nathan Gonzales • 04/06/2020, 11:51:44 AM Do you have TSS friendly options for front bumpers like the 4runner blitz?
A 04/06/2020, 2:43:39 PM All non-tubework front bumpers are TSS friendly.
Q Andy • 04/08/2020, 7:10:36 PM Would any modifications need to be done to the factory skid plate on a TRD Pro? How about the SR5 factory skid plate?
A 04/17/2020, 5:09:59 PM Either skid will fit fine with this bumper.
Currently Viewing Reviews with a rating of 5. Click here to reset.
5.00/5 Stars out of 12 Reviews
Write a Product Review: 4Runner Front Winch Bumper | Blitz | 5th Gen (10+)
Pages 1 2
Anthony Holmes (Seattle WA) | June 2nd, 2020
I installed the bumper about 9 weeks ago and man oh man do I regret not placing my order sooner. I chose to roll with aluminum W/ powder coat and she is a beauty! I was looking for the right bumper to fit the aggressive vision I have for my 4Runner but still keeping to the body's original dimensions. Also, with the Fairlead License Plate Flip I’m still completely legal in WA. Thanks Victory 4x4!
Vinnie (Kuna, ID) | May 3rd, 2020
Like everyone else, I did a lot of research trying to find the best value from a reliable company. Look no further. This company has service that is second to none that I have dealt with, excellent lead times (shorter than predicted) and delivers a quality product that performs. The fit was perfect on my 2018 SR5 and holds a Smittybilt X20 10K winch with no problem. I mounted the solenoid on the side location, which fit (albeit a little snug) without issue although I believe it would fit fine in the center location. Be aware, I did have to cut into the plastic channeling in front of the AC condenser for the bumper to fit well. I actually installed it myself, without a jack, which was difficult but absolutely doable with a little bit of elbow grease. Between the video online, the instructions, and a little bit of common sense figuring out where to cut into the condenser channeling, the install was a breeze (took maybe 4 hours total to do it alone). Altogether, this is an EXCELLENT bumper, which I expect to see grow in popularity as people catch on to what victory is putting out. I now have changed all my planned mods to Victory parts after seeing the quality the put out. Couple notes: It would be helpful to add numbers to the bolts and to annotate the location of the bolts, along with a full parts list. Additionally, a note and measurements of channel cutting would be helpful for those who are a little timid with cutting into their 4Runner. And lastly, leaving more bumper around the edges helps ensure a good seal around the Blitz Bumper.
Derek (Vancouver WA) | March 18th, 2020
I researched a lot of bumpers. Picked this one because it was already powder coated and the install video was easy to follow. Arrived packaged to protect against damage. I have been in freight for over 20 years and have not seen something packaged so well to protect from damage. All parts were present and no damage at all. Followed the video and it almost went together perfect. Had some trouble lining up the bumper bolts, more than likely due to our limited mechanical experience. We took our time and finally got it into place. Tightening the bolts took forever because of lack of space. If we had a air ratchet it would have helped. But really that’s a Toyota problem not a Victory problem lol. The only two suggestions would be like a document that shows were all the bolts go to. Probably spent about a half hour figuring that out. And one on that makes it more clear were to cut. That stressed me out. I am amazed it looks like the bumper came right from the factory, everything leaned up perfectly. Added a winch as well love the look.
Jeremy (Georgia) | February 29th, 2020
Completely satisfied with the entire process, from customer support to ordering to install. Product speaks for it self. My opinion this is a great product and untouchable company that offers great deals. Install videos great tool. Thanks guys at victory
Patrick | February 25th, 2020
Sweet a** bumper. Very sleek and slim. Doesn't pop out like other competitors, so it looks way better. Quality steel product with nice welds and a great powder-coat finish. Have gotten many compliments on its look. Very nice approach angle as well. Install is pretty straight forward, however I suggest you have a helping hand. I would recommend this Victory product to anyone and everyone. I am beyond satisfied.
Note From Victory 4x4: Thanks for the review!
Jeremy (Georgia) | February 22nd, 2020
Thanks to everyone who participated with the build for this bumper. Could not be happier with this product and all the installation instructions to follow.
Mike (Arizona) | February 4th, 2020
Have to admit I was a little nervous to cut into my new 4Runner but it turned out to be pretty easy. Absolutely love the bumper and have received many compliments about the appearance. Coupled it with a Warn VR10 and the 20” light bar. Best looking set up around! Liked it so much I bought the rear bumper too!
Note From Victory 4x4: The first cut is always the hardest! Thanks for the review :)
Holly (GA) | January 7th, 2020
I was a little intimidated about cutting on my factory bumper, but watched the video several times and viola, it looks great!I really just wanted this bumper! The blitz with bar bumper looks seamless and bolted right on! I went with Victory instead of other companies similar products because it doesn't stick out like a bulldog's lower jaw!! Took me and my husband a few hours of total time for installation!
Note From Victory 4x4: Thanks for the review and glad you found the courage to cut the factory bumper! We agree, it's worth it!
Josh (Gilbert, AZ.) | October 25th, 2019
I love this bumper I went with the Victory 4x4 Blitz front bumper because it has one of if not the most flush fit. Approach angle was very important to me and this bumper sits nice and tight to the body of my 4Runner!! Highly Recommended.
Bryan Read (Indianapolis, IN) | October 16th, 2019
I ordered this and received it even before the lead time was up. Packed perfectly and everything was included. This thing is a beast and looks amazing. Install is difficult for one person, especially after installing a winch and light bar, but luckily I had a hoist in the garage. The welds are top notch and the powder coat was pristine. I have absolutely nothing bad to say about this bumper - an excellent buy! It will definitely make me look to Victory for any other additions (ie. molle panels) I am considering.
Please note: Install videos are meant to be used as a guide, and aren't always the most up to date information on product installation and improvements.
Please be sure to read the PDF installation instructions as well.