4Runner Aluminum Rear Bumper | EVO Strike | 5th Gen (10-24)
★★★★★
5/5 Stars. (8 Reviews)
$2,499.00
Code: V4R5RS
Weight: 95 (lbs)
(Oversize Fee Applies)
- 3-piece aluminum shell, steel inner mounting structure
- Built-in hitch.¹
- Built-in provisions for cube lights.
- Built-in provisions for left and right Adventure Carriers (can be added at any time).
- Does not retain Limited proximity sensors.
- Compatible with BSM sensors with relocation (see related products below)
- Not compatible with TSS (2022+).
- Installation requires drilling of the frame and cutting the plastic bumper fascia.
- Proudly designed and made in the USA.
Our Evolution Series Strike Rear Bumper is engineered with a lightweight aluminum outer shell built on a high-strength steel support structure. This gives you the best of both worlds: weight savings/corrosion resistance, along with strong recovery points/carrier support. This made-in-the-USA bumper features integrated cube light mounts, 3/4" recovery tabs, and built-in provisions for dual swingouts that can be added or removed at any time!
The bumper is coated in a two-stage satin textured black powder coat with silver-textured accents over a durable zinc primer finish.
¹ Designed to support the loads of the factory tow capacity, but carries no SAE certification, nor is it designed to meet any DOT or FMCSA regulation.
We produce these products in a low volume compared to the OEMs or aftermarket receiver hitch companies. As such, it's not feasible for us to get this product tested against SAE J684 specifications or design it to meet specific DOT or FMCSA regulations. So while we try to over-engineer our products with the loads of the factory vehicle capacity in mind; towing a trailer on public highways is at your own risk and we make no claims on the legality or viability of doing so. We cannot offer any recommendations on capacity beyond this. If the ratings of the factory receiver hitch are important to you, we would recommend choosing a bumper that keeps that in place.
Looking for answers to common questions about us or our products? See our FAQ here.
43 Questions asked on 4Runner Aluminum Rear Bumper | EVO Strike | 5th Gen (10-24)
•
Ask us anything
Q
Clive K Watson • 03/29/2020, 1:25:57 PM
Weight with tire carrier
A
04/06/2020, 1:46:00 PM
The bumper is 110 lbs, the carriers are 40 lbs a piece.
Q
Sophoeut • 04/06/2020, 4:15:50 PM
Does it come with cube light?
A
04/17/2020, 5:09:59 PM
It comes with the holes for them, but the cubes are additional. Part: LED3X3
Q
Collin Blake • 04/12/2020, 9:52:28 PM
Does the bumper cover or mount over the factory receiver hitch? Is it compatible with the factory spare tire mount underneath?
A
04/17/2020, 6:07:22 PM
It replaces the factory receiver and comes with its own. You can use the OEM spare tire location, yes.
Q
Tyler Dorman • 07/05/2020, 4:15:05 AM
Any plans to make the bumper in aluminum?
Thanks!
A
07/07/2020, 2:39:07 PM
No, just because of the loads seen on the carrier hinges and trailer hitch.
Q
Matt • 07/22/2020, 3:20:07 AM
Will this bumper fit a GX460?
A
08/05/2020, 11:01:24 AM
No, we have a version coming for the 460.
0
0
0
0
8
Luis (TX) | September 30th, 2021
Excellant product, pretty simple install other than having to cut the plastic! But if you take your time, tape it off and re-measure a few times you should have no problems. The tool I used to do my cutting was a Dremel, super easy at low speed follow the tape line then turn it up a notch to cut. The you tube video says down 5 inches, but I should have gone 5 and half inches and 2 around the back for a tighter fit. Does not look bad as it is, but that's what I should've done.
D (NC) | May 26th, 2021
I like that the bumper is really modular, and you can add as you need. This is a big reason why I ordered this bumper. The install vids seemed straightforward enough, but it did not go nearly as smoothly it should have. None of the holes lines up, so there was a ton of jostling, and prybars required to get all the nuts and bolts together. Additionally, the rear plate with the "victory logo did not fit, nor did the screws that were supposed to hold it. I had to grind part of the edge off the logo piece, and tap all the bolt holes for the fasteners to get it to work. Once installed, everything is ok, although the bumper does sit atad off to one side...tired of messing with it. Lastly, the hundreds of dollars worth of powder coat has begun to chip off...hasn't been hit, banged, dropped or anything, just started flaking off.
Note From Victory 4x4: We are sorry to hear about the install issues. If you are still having problems, please contact our tech support team. The holes should be lining up on the install.
Adam (Knoxville TN) | May 3rd, 2021
So the install went way smoother than I could have imagined the only major hood back we had was getting a third set of hands to push down the trim piece for the rear hatch. After that everything was easy peezy. All the holes lined up perfectly with a little shift here or there. One thing I don’t believe Darryl mentions in the video is how far in to cut which I wish he had because I over cut and have some gaps but luckily I had some wide edge trim that filled those sections. With the install video almost memorized we had the main bumper installed within about an hour. Then we took it back off trimmed just a hair more and back on. I don’t know if having a brand new truck helps but I didn’t need to pry my exhaust I just pulled down and out and it popped right off the rubber isolator. Powder coat looked great. I did have one spot that looked like it happened during shipping but I can live with it and will just hit with some flat black paint. It’s armor after all in about a year I’ll probably have to take it all back off and re paint or powder it again knowing my luck. All in all if you’re looking for an awesome sexy bumper that will no doubt take a beating. You found it. And you don’t have to wait a year to get it. (Although when Corey reminded me business day instead of actual days he did get me in the feels). All in all another outstanding product from victory and can’t wait to put it to the test.
Bird Dog Overland (Chicago) | March 24th, 2021
Very clean look and functional. Got multiple accessories with it as well. No regrets and would highly recommend to others.
Josh (Colombia) | March 23rd, 2021
Good evening,
I ordered my rear bumper without any swing arms to start. The delivery was on schedule and the item arrived perfect without any damage. When installing I noticed various things that were not clear on any video or duering the pruchase information. First of all the contact points at the rear of the bumper did not allign with the original position, this due that the holes where higher then original. Had to adjust and make holes bigger. Aditionally the mud flaps do not adjust to the new bumer, this creates an image of a section as incomplete but this is not covered in the install video. The plate with the Victory Logo did not allign corectly for the bolts to go in so drilling was required. The 3X3 cube lights is not mentioned in the video but the space is not flush, this creates a problem on choosing which light.. I ended up adding a light mounted externally in order to cover the hole completely but aditional holes had to be made in order fot the install. Overall i like the bumper and feel it looks great on the car but things would have been much easier with more information.
Sjbill17 (NC) | June 20th, 2020
2015 4Runner Trail Premium
Installed the Strike bumper w/ dual Adventure Carriers, Tire mount, Dual Jerry Can Carrier, and Ladder for Adventure Carrier. I must say that with the help of the install videos, the install was a breeze.
My shipment arrived in a timely manner even during the whole COVID-19 deal. Was extremely well packaged. All powder coated components were perfect. Not blemish that I could find. Don't know how to post pics.
Anyway, great company. Great service. Great products. Buy with confidence. You will not regret it.
steve rundall | December 6th, 2019
Feel like your rig is lacking in the boooo tayyy?
Well this sumbich right hur is just what you need...
Make that thin backside look like you took the 100 day squat challenge and made it your biotch.
I’m talking J Lo booty. Not that Miley Cyrus thanksgiving turkey looking backside.
Get one these and you’ll have all the boys jaw dropping when you roll past in the club.
Note From Victory 4x4: Haha, best review ever.
Nate | November 26th, 2019
I was impressed by the quality of the product and the quality of the packaging done to protect the bumper during the shipping process. The video guide was informative and easy to follow. Customer service has been great. The price point is competitive as well.
ACCESSORY MOUNTS
A wide variety of accessory / lighting mounts available and the list is growing!
See related products below!
UNMATCHED STRENGTH
The Victory 4x4 Bomb Proof Spindle design makes for the strongest carriers on the market.
Please note: Install videos are meant to be used as a guide, and aren't always the most up to date information on product installation and improvements.
Please be sure to read the PDF installation instructions (if available) as well.
Please be sure to read the PDF installation instructions (if available) as well.
