Roof Rack Awning & Acessory Mount

★★★★★ ★★★★★ 5.00/5 Stars. (1 Review)
  • Roof Rack Awning & Acessory Mount
  • Roof Rack Awning & Acessory Mount
  • Roof Rack Awning & Acessory Mount
  • Roof Rack Awning & Acessory Mount
  • Roof Rack Awning & Acessory Mount
  • Roof Rack Awning & Acessory Mount

Price: $99.00

 

Code: VRKAWN

Weight: 2 (lbs)


Free Shipping!



    Designed to securely mount an awning to any of the Victory 4x4 roof racks. Comes coated with a 2 stage satin textured black powdercoat over durable zinc primer finish.

    • CNC cut and formed from 1/8" steel
    • Sold in pairs
    • Includes hardware to mount to the roof rack.
    • Bolt-on Installation
    • Made in the USA!

Looking for answers to common questions about us or our products? See our FAQ here.

19 Questions asked on Roof Rack Awning & Acessory Mount

Ask us anything



Q Adam LaVigne • 04/21/2020, 11:43:46 AM Is there any way that these would support a bicycle mounted to them, similar to how your bed rack bike mount works?
A 04/21/2020, 11:50:04 AM We have not tested them for this kind of load, sorry.
Q Carlos Jauregui • 05/06/2020, 3:17:22 PM This this for a pair of brackets or a single bracket?
A 05/07/2020, 4:02:09 PM They are sold in pairs.
Q Nick Arbia • 05/14/2020, 6:00:06 PM Will these work on a prinsu style roof rack also?
A 05/15/2020, 1:52:09 PM We know that Prinsu's won't work on ours, so we assume it won't work the other way around. Sorry we have not tested it specifically.
Q Justin Covington • 05/28/2020, 9:50:18 AM How will these work in conjunction with the roof top tent mounts? Mainly want to know if the tent will sit over them or not.
A 06/01/2020, 10:08:59 AM The RTT would have to fit beside or above the mounts.
Q Shaun • 06/01/2020, 9:21:14 AM Does this product come with the hardware needed to mount to the roof rack?
A 06/01/2020, 10:08:59 AM Yes, they come with bolts and t-nuts to mount to the rack.
Q Shaun • 06/02/2020, 7:40:15 PM What are the dimensions of the awning facing side (where the awning comes in contact with the mount)
A 06/03/2020, 4:22:33 PM Roughly 2 x 4.75"
Q Blake Rondeau • 06/12/2020, 2:37:06 PM Will 2 mounts be strong enough for a 2.5 meter (8 ft) awning?
A 06/16/2020, 10:12:23 AM Yes, as long as the awning manufacturer recommends using 2 mounts and not 3.
Q Jacob Sauget • 07/15/2020, 8:02:29 PM Will these work with caliraised economy racks?
A 07/21/2020, 11:32:11 AM We have not tested it, sorry.
Q Jose • 08/06/2020, 0:55:34 AM Will this mount work with any type awning?
A 08/11/2020, 5:22:43 PM They are designed to be as universal as possible.
Q Zach • 08/22/2020, 12:38:57 PM How high do the mounts sit above the top of the rack itself? Concerned about overhead garage clearance.
A 08/26/2020, 10:01:29 AM They add about 2". The awning may add more depending on it's mounting and design.
Q Mike • 10/10/2020, 6:47:14 PM Do these awning brackets fit 2 inch or 3 inch roof bars?
A 10/16/2020, 3:25:50 PM 2"
Q sean • 11/23/2020, 12:25:51 PM Have you used these for a side mounting option for a high lift?
A 11/25/2020, 2:45:55 PM We haven't, but it should work well. You may have to open up the slots for the larger hi-lift hardware however.
Q Branson Young • 12/26/2020, 9:31:07 PM Hoping to use the awning mount with a JW off-road roof rack. Attaching to the crossbars shouldn’t be an issue but saw the question regarding them not being compatible with a prinsu rack. Would it be possible to confirm fitment or get a few dimensions to verify prior to ordering?
A 12/30/2020, 4:56:07 PM Please contact our customer service team at 269-353-1184.
Q Peter • 02/16/2021, 11:05:12 AM Will these work to mount a RoadShower? Is there a weight limit? (10 gallons of water plus the roadshower = ~100lbs)
A 03/01/2021, 3:13:17 PM The best place for a road shower would be on top of the rack. That weight cantilevered on the outside of the rack would put some interesting loads on the rack sides and roof mounts with water moving around. The awning mounts themselves would be fine, however; we just haven't tested the rest of the rack in that config.
Q Michael Pellegrino • 02/27/2021, 9:20:20 PM I can't see the face of the mounts. Are there slots (vertical) that the awning mounting screws go into that allow for adjustment or just holes with no vertical adjustment. I have a topper that is 4" higher than the cab with Yakima towers on it. I need to mount the awning to the two Yakima crossbar ends and then have 1 more mount on the cab Victory Roof Rack which is lower than the cap mounts. Hoping that your mounts allow for vertical adjustment to be level with cap Yakima mounts.
A 03/01/2021, 3:13:17 PM We do not have full slots on the awning mounts. One hole, one slot for different awning mounting widths.
Q Zack • 02/28/2021, 3:02:42 AM Can these be used to mount an awning to the bed rack?
A 03/01/2021, 3:13:17 PM They aren't designed for that. Usually with a bed rack some universal 90 degree brackets will work fine, many awnings include them.
Q Sahil Patel • 04/08/2021, 11:24:04 AM What awning do you recommend for these brackets?
A 04/12/2021, 1:13:17 PM We run FreeSpirit awnings.
Q Dolly Ann Smith • 04/15/2021, 9:47:24 AM Will this mount to a 2000 Toyota Land Cruiser? I Have an awesome roof rack, everything else on my truck (Sporty) is ARB, except the roof rack. We also have 2 Lexus LX470’s - a white 2000 {Swampy as he had a snorkel and we off-road in Picayune State Park in SWFL. And the 3rd (Fancy) is a black 2001 FX470 I also love the single and double black metal gas can holders for my Land cruiser. My bumper is ARB, but so swing out for a spare as we all have amazing off-road tires.
A 04/21/2021, 2:11:12 PM Those sound like nice rigs! This mount is designed for our roof rack, we have not tested it on other setups.
Q Willie Ruiz • 04/17/2021, 0:37:58 AM Will this fit on a Hooke road roof rack? For a 2013 Toyota Tundra?
A 04/21/2021, 2:11:12 PM We have not tested with that rack specifically.
★★★★★ ★★★★★
5.00/5 Stars out of 1 Review
5
1
4
0
3
0
2
0
1
0
Mounts Needed Modification for Rhino Rack Batwing
(Tennessee) | April 15th, 2020
So... These mounts are not compatible with the Rhino Rack Batwing. The space between the tracks on the awning are spaced farther apart than the mounting sections allow on the mounts themselves. Honestly not a problem, I just had to drill a new hole to match the awning track spacing. If they would have continued the opening section another 1" or so, it would have been perfect. Other than that everything seems good to go. We'll see how well it holds up over time. Love Victory products, just a little baffled if these mounts are produced for a specific awning.

Please note: Install videos are meant to be used as a guide, and aren't always the most up to date information on product installation and improvements.
Please be sure to read the PDF installation instructions (if available) as well.



Related Products