Tacoma Bed Stiffeners | 2nd & 3rd Gen (05+)
★★★★★ ★★★★★ 4.73/5 Stars. (11 Reviews)
- Designed to strengthen the bed of the Tacoma. Comes coated with a 2 stage satin textured black powdercoat over durable zinc primer finish.
- Made from 3/16" steel
- Easy installation, does require drilling
- Adds additional tie down locations
- Works with slide out refrigerators
- Sold in pairs
Looking for answers to common questions about us or our products? See our FAQ here.
13 Questions asked on Tacoma Bed Stiffeners | 2nd & 3rd Gen (05+) •
Ask us anything
Q Timothy Collins • 06/06/2020, 9:38:50 PM the description states no drilling required but the video clearly says drilling is required. Which is correct for install on a Tacoma 2020 long bed?
A 06/10/2020, 4:43:34 PM The description states, "does require drilling"
Q David Leben • 06/14/2020, 9:28:27 PM Will these fit the 2020 Toyota Tacoma? All I see is 2005+. Thank you
A 06/16/2020, 10:12:23 AM Yes
Q Nick mcnutt • 08/31/2020, 12:22:34 PM Do these come in a pair or do I need to order two of them
A 09/03/2020, 2:55:58 PM They are sold in pairs.
Q Mark • 09/18/2020, 8:56:50 AM Will these work with a Decked system in place?
A 09/24/2020, 11:01:43 AM No they do not.
Q Hense • 03/08/2021, 3:16:17 PM I was intrested in your bed stiffeners, but already have a ARE camper installed. My question is would I be better off to install the stiffeners with the camper off, or can I leave it on while I install them.
A 03/16/2021, 3:46:53 PM They should install fine either way.
Q Jorge • 03/28/2021, 10:17:11 PM What type of paint did you use to cover the naked metal afthe the drilling?
A 04/02/2021, 1:17:54 PM Any good primer and black paint. Rust-Oleum works well.
Q Roland • 06/14/2021, 12:47:55 PM Does bed stiffener interfere with OEM bed extender?
A 06/25/2021, 11:53:18 AM They are not compatible.
Q Mike • 11/13/2021, 8:59:08 PM Would these fit/work a 2021 colorado?
A 11/15/2021, 10:24:03 AM They will not.
Q Garrett • 01/30/2022, 12:01:45 PM Will these work with a bed slide system in place?
A 02/09/2022, 10:56:43 AM We have not yet tested, but it is likely that they will not.
Q Andre • 07/03/2022, 10:03:13 AM Hi will this work with undercover swing case truck bed toolbox?
A 07/07/2022, 3:19:10 PM It will not, they mount in about the same location.
Q Liz • 09/23/2022, 11:09:21 PM Can the left and right be rotated 180 and switched so that the tie down points are facing the tailgate?
A 09/27/2022, 9:48:42 AM Yes, they can.
Q Richard • 12/15/2022, 1:48:14 PM Are these used front and back sidewall? My bed has cracked on the outside just back from the cab.
A 12/20/2022, 2:28:33 PM The only fit in the rear of the bed as shown.
Q Jkr242 • 01/31/2023, 10:07:46 AM Will these correct already existing sag?
A 02/03/2023, 1:53:04 PM Haven't tested them for that at the shop. You would probably need to correct the sag before installation.
Currently Viewing Reviews with a rating of 5. Click here to reset.
4.73/5 Stars out of 11 Reviews
Write a Product Review: Tacoma Bed Stiffeners | 2nd & 3rd Gen (05+)
brian (Wa) | May 13th, 2021
love the product it is definitely helping keeping the bed from widening install was easy and is very durable
Ryan M. (Pacific Northwest) | March 13th, 2021
I installed these in my 2020 Tacoma in about 30 minutes. They seem to work great and the paint has not chipped from use. These are a great upgrade for someone on a budget.
Nate (Marienville, PA) | February 20th, 2021
Topnotch addition to my 2020 TRD OR with upTOP bed rack and iKamper. Doesn’t interfere with CargoGlide operation. Tie down points were so well placed I just eliminated that awful Toyota swivel D-ring which gave me a better bite on the bolt and much cleaner setup. Painted the bolt heads and washers flat black for that factory installed look. Truly appreciate the high quality product, excellent packaging, and the great service. Ordered on 2/15 and received on 2/19, better than Amazon these days.
Abby Dahl (Tennessee) | June 7th, 2020
These installed just as advertised from the YouTube videos. All hardware provided. Powder coat was well done. I like the way they look and they don't protrude into the cargo space but just a small amount.
Gerhard (Palm Springs, CA) | May 13th, 2020
Excellent addition to my girl friends Taco. We wheel a lot and often go for multiple days. We have the RTT setup on her Taco using the Victory Rack and the additional weight high up puts a lot of stress on the truck bed. Install was a breeze (especially after watching the video first), I also appreciated that the tools needed were called out which guaranteed we had everything before we started. The bed is rock solid, highly recommended!
Ace Esguerra | March 7th, 2020
Install was such a breeze except for the bolts that go back into the bed of the truck but that’s not a victory 4x4 issue. it was slightly difficult to line up and screw the bolts back in but it worked! I bought them because I noticed my bed was starting to flex with my bed rack and RTT on top so I just needed the peace of mind that my truck bed wouldn’t fall apart. I chose these because of the low profile flat design for the bottom of the bed so I could add a fridge in the near future without moving it more to the center of the bed. although it took over a month to ship, their customer service was superb and they kept me in the loop. would absolutely do service with them again!
benny (San Fernando) | February 24th, 2020
I'm not sure if my review gets approved or not but I chose Victory 4x4 bed stiffener out of all others due to its compact size, and indeed looks great. Only issue I had was they took month long to deliver mine. Two emails to them returned unanswered. Finally called in about month later. I then realized they forgot to process my order. No apology but acting like business as usual saying will ship out in next few days! I was strongly considering their roof rack as my next purchase but I will not do business with Victory 4x4 again. I'm sure they will be fine without me.
Note From Victory 4x4: Very sorry for the delay in your order! We will have customer service contact you to make sure everything went smoothly.
Steve Roberts (Calgary, Alberta) | February 15th, 2020
I really like the bed mat because it didn't interfere with my existing bed mat, The only thing about these stiffeners is the bolt on the bottom closest to the sidewall was tricky to re-install, since Toyota uses a shorter bolt the added thickness of the bed stiffener made it hard to put back in. Otherwise, hands down love this product. Bonus points for shipping wrapped and sealed!! plus the stickers is sweet !!! Although i wish companies would give out more patches, but stickers is the standard so no complaints here
Note From Victory 4x4: Thanks for the review! Yes those shorter bolts can sometimes be frustrating :)
Marc (Los Angeles) | February 3rd, 2020
Great Build Quality for the stiffeners. The installation video on youtube has a 2016 Tacoma, my truck is 2007. The bolts were harder to remove and when installing the top nut to the truck, there is a metal brace that makes it difficult to thread the bolts. I was able to complete the installation. It would have been a fast install if I didn't run into those problems. Other than that, these stiffeners are going to do the job.
Note From Victory 4x4: Sorry to hear about your troubles, but glad you got it installed OK. Thanks for the review!
Ron (Texas) | January 8th, 2020
I went with the Victory Bed Stiffener because it is the least intrusive into the bed of the truck. The install video has the stiffener installed with the tie down facing out the back. I reversed the stiffeners as wanted the tie down pointing into the bed, with the bent angle facing out of the truck. I had to replace the factory bolt on the tie down with a slightly longer bolt. Drilling the holes in the truck bed was the most difficult part of the install.
Note From Victory 4x4: Thanks for your order and the review!
Please note: Install videos are meant to be used as a guide, and aren't always the most up to date information on product installation and improvements.
Please be sure to read the PDF installation instructions as well.
Please be sure to read the PDF installation instructions as well.