• Victory 4x4
    0

    What Comes With a Victory 4x4 Roof Rack? Everything You Need to Install It

    Published November 18, 2026

    Every Victory 4x4 Evolution Series roof rack now ships with paint protection film, Ultra Black sealant and anti-seize, along with the black stainless hardware, so you can install it the day it arrives without a trip to the auto parts store.

    In short:

    • Paint protection film, Ultra Black sealant and anti-seize now come with every rack
    • Black stainless mounting hardware is included, as it always has been
    • Every Evolution rack is a bolt-on install with no drilling
    • Nothing extra to buy, so the job starts when the box arrives

    Why Did We Start Including These?

    Over the years, we've talked with a lot of customers on install day, and we kept hearing the same story. The rack showed up, they cleared a Saturday, and halfway through the install they were driving to the store for sealant or anti-seize because the instructions called for something that wasn't in the box.

    That never sat right with me, since a roof rack should be the easy part of your build. So we put everything the install calls for into the box, which means the only things you need to supply are basic hand tools and a little time.

    What's in the Box?

    • Black stainless hardware: Bolts the rack to the factory mounting points
    • Paint protection film: Protects the paint where the rack mounts meet the roof, so nothing rubs or scuffs over time
    • Ultra Black sealant: Seals the mounting points against water so the roof stays dry inside
    • Anti-seize: Keeps the stainless bolts from galling or seizing in the threads, so the rack comes off easily later

    Why Do Paint Protection Film, Sealant and Anti-Seize Matter?

    Each one solves a problem you might not notice until a year or two down the road.

    The paint protection film matters because a loaded rack moves slightly as the vehicle flexes on the trail and on washboard roads. Without a barrier, that movement can wear through the clear coat where the mounts sit, and nobody wants to find that when they eventually take the rack off.

    The sealant matters because the mounting points are openings into the roof. A good seal keeps rain and car wash water where it belongs, which is outside your headliner.

    The anti-seize matters because stainless steel bolts can gall in their threads, especially after years of heat, cold and road salt. A small dab on each bolt means you can remove the rack when you sell the vehicle or move it to your next build, instead of fighting a seized bolt.

    Do I Still Need Anything for the Install?

    You'll need basic hand tools and, ideally, a second set of hands to set the rack on the roof. Everything else is in the box, and the step-by-step install guide is on each product page.

    Which Vehicles Does This Apply To?

    It applies to every Victory 4x4 roof rack we build, including the Evolution Series for the Lexus GX470 and our 4Runner, Tacoma and GX racks. If you're comparing 4Runner options, our guide to the best USA-made roof racks for the Toyota 4Runner covers specs, load ratings and fitment for each generation.

    Frequently Asked Questions

    What comes with a Victory 4x4 roof rack?

    Every Evolution Series rack includes black stainless mounting hardware, paint protection film, Ultra Black sealant and anti-seize, so you have everything the install calls for.

    Do I have to drill my roof to install a Victory 4x4 roof rack?

    No. Every Evolution Series rack is a full bolt-on install that uses the factory mounting points.

    Why does a roof rack need anti-seize?

    Stainless steel bolts can gall or seize in their threads over time. Anti-seize keeps them turning smoothly, so you can remove the rack later without damaging the hardware.

    Will a roof rack damage my paint?

    A loaded rack can rub the paint where the mounts meet the roof as the vehicle flexes. The paint protection film included with every Victory 4x4 rack protects those spots.

    Do I need to buy anything else to install it?

    No. You'll only need basic hand tools, since the hardware, film, sealant and anti-seize all come in the box.

    Brian Meyers
    Founder, Victory 4x4