• Victory 4x4
    0

    Ford E-Series Van Roof Rack (92+)

    5.0 · 2 ratings
    • Ford E-Series Van Roof Rack (92+)
    • Ford E-Series Van Roof Rack (92+)
    • Ford E-Series Van Roof Rack (92+)
    • Ford E-Series Van Roof Rack (92+)
    • Ford E-Series Van Roof Rack (92+)
    • Ford E-Series Van Roof Rack (92+)
    • Ford E-Series Van Roof Rack (92+)
    Fit at a Glance More questions? See the FAQ
    Fits
    1992+ Ford E-Series van, regular and extended body
    Size
    124" x 60.5" (regular body) or 144" x 60.5" (extended)
    Load
    300 lbs dynamic, 800 lbs static
    Install Time*
    Home: 1 day · Shop: 3 to 4 hr
    *Times are estimates and vary with vehicle condition and installer skill.
    $2,079.20
    Regular
    $2,599.00
    Black Friday All Month Sale – Save $519.80
    $14.95 Flat Rate Shipping

    Code: VFDVRK | Weight: 90 (lbs)



      Specs
      Vehicle1992+ Ford E-Series Van
      Material3/16" aluminum with steel mounting brackets and extruded aluminum rails
      FinishSatin textured black powder coat over zinc primer
      Rack Dimensions124" x 60.5" (Regular Body) / 144" x 60.5" (Extended Body)
      Crossbars12 (regular body) / 14 (extended body)
      Load Rating300 lbs Dynamic / 800 lbs Static
      WarrantyLimited Lifetime

      Need to haul gear that doesn't fit inside your van, or ready to add more cargo capacity? This roof rack gives you a solid, secure place to mount almost anything up top, so your gear has a place to go and your interior stays free for the essentials.

      This rack is built from extruded aluminum rails with steel mounting brackets, giving you the strength you need without adding unnecessary weight. Milled T-nut access points run the length of the rack, so you can mount gear anywhere along the top, and easy bolt-together installation means no drilling into your van's roof.

      Features
      • Laser cut and formed from 3/16" aluminum with steel mounting brackets and extruded aluminum rails for lasting strength
      • Milled T-nut access points let you mount gear anywhere along the rack
      • 12 crossbars on regular body vans, 14 on extended body vans, for flexible gear mounting
      • Easy bolt-together installation, no drilling required
      • Fairing edge trim included
      • Available with or without a 40" light bar cutout (light bar not included)
      • Hardware included
      • Made in the USA

      Extra Mounting Hardware
      Need extra hardware for more accessories? Grab the T-Slot Nut and Stud Kit (set of 12), or the T-Slot Nut and Bolt Kit and T-Slot Stud Kit.

      Fitment & Notes
      • Fits 1992+ Ford E-Series Van
      • Rated for 300 lbs dynamic load (while driving) and 800 lbs static load (when parked), evenly distributed across the rack
      • Light bar cutout version includes light bar mounting brackets. Cutout fairing fits a 41.25" max lens housing width single-row LED light bar; bars up to 43.5" (mounting stud width) will fit with our mounts, but trimming the fairing is required
      • We recommend applying paint protection film under the front and rear fairings where they contact the vehicle, to prevent dirt and debris from scratching paint over time
      • Backed by a limited lifetime warranty against material, manufacturing, and design defects. See our warranty page for full details

      A quick note on weight ratings:
      These are a guide, not a replacement for your vehicle's manufacturer roof load limits or GVWR, so check your owner's manual first. Added weight changes handling, especially off-road or in an emergency maneuver, so load smart. As with any modification, you're responsible for how it's installed, loaded, and used.


      Made in USA

    Which vans does it fit?
    It fits the 1992+ Ford E-Series van, regular and extended body.

    How big is it?
    124" x 60.5" with 12 crossbars (regular body) or 144" x 60.5" with 14 crossbars (extended body).

    How much weight can it hold?
    It is rated for 300 lbs dynamic (while driving) and 800 lbs static (when parked), evenly distributed.

    Can I run a light bar?
    Yes. The light bar cutout version includes mounting brackets and fits a single-row bar up to 41.25" lens housing width. Bars up to 43.5" mounting stud width fit after trimming the fairing.

    Will the fairings scratch my paint?
    We recommend paint protection film under the front and rear fairings where they touch the vehicle.

    Still have a question about fit?Talk with the team that builds it, right here in Kalamazoo. Mon to Fri, 8:30 AM to 4:30 PM ET.

    Customer Reviews

    5.0
    2 ratings · 2 written
    5★2
    4★0
    3★0
    2★0
    1★0
    Nov 27, 2024

    The perfect roof rack at last!!!

    After giving my 2005 Ford E-350 Quigley 4x4 a makeover, and a new roof due to rust, putting the old crappy luggage rack back up top was just not going to work. I wasn't pleased with the old traditional style giant roof basket style for the full size vans and I needed something I could solidly mount my awning to along with bike racks, a new roof top water tank and move my MaxTrax up top instead of strapped to the rear tire. I quick call to Victory and a chat with Lee who helped me configure the few add on's I would need to accomplish my goal, and a huge thumbs up on the recommendation to get the 270 degree awning mounts, those things are STOUT!
    After assembling it on the ground I put it up top, fastened the halves together and found that the brackets weren't in the rain gutters, they appeared too narrow. I semi panicked call to Victory just before closing time, again with Lee, suggested I loosen all the bolts to let the rack be a little more floppy and loose and see if the brackets will then line up. It made sense and I did read that in the instructions to leave everything loose so I did and I was very happy when everything just started falling into place! The rack is all mounted, awning attached, Maxtrax, water tank and soon a storage box. It looks great and is extremely solid. My only advice is that when you are inserting your hardware in the t slots, since the hardware can only be inserted from one end, make sure you don't plan to put something on the other side of what you are attaching next as you will then have to undo your fasteners to slide your hardware across to the next project. Essentially, start filling your rack from the end opposite where you insert your t slot hardware. Might be nice to allow t slot hardware to be inserted at either end of the rail rather just one. It's a tiny issue, just involves a little planning ahead is all.

    Glenn Plank
    Feb 26, 2022

    Exactly what I dreamed of!!!

    I connect with the team a victory months ago about if they were going to build a rack for the E-350 after seeing the one the made up for the Chevy. They updated me as they started the design work. About a month before it was released they again connected to keep me updated and sent me out a link the second I could order it. After ordering it communication was great! Had to be patient as they built and sent it with all the issues with supplies. Once I received the basket it came very well packaged. I put it on the van and the only issue I had was their were a few rear bolt missing (the guys at victory sent them as soon as I connect with them/ also I had to grind one side of these bolts to fit into the rear bracket) also my front brackets needed some modifications. (I don't know if this was because of my year or what. But a little cutting/grinding/welding/prime and paint. And everything was up and looking amazing. The guys at Victory did talk to me about the brackets to help find a solution but since I had the tools and such made more sense to get it done my self. All in all very pleased with the product and the people I've connected with. Will definitely tell others about this company! Thanks again Victory Team!!

    Randy Wyatt
    Response from our team

    Thanks for the review Randy, glad you love the rack!

    Reviews come from our customers. Buyers are invited to rate their parts after their order ships, and those reviews are marked Verified Buyer. We publish positive and negative reviews alike.

    No customer photos yet. Got this part on your rig? Be the first to show it off.