4Runner Floor | 5th Gen (10-24) | Off-Grid Modular Drawer System

12 Questions asked on 4Runner Floor | 5th Gen (10-24) | Off-Grid Modular Drawer System • Ask a Question

Ask us anything

Q Marco • 02/05/2023, 10:28:57 PM Does it fit 4runners with 3rd row seats?

A 02/14/2023, 4:18:03 PM Not compatible with 3rd row.

Q Gabriel • 02/07/2023, 7:59:46 PM Can that floor system be modified to fit a 2022 Gx460 with third row installed by installing it directly to the third row seats tie down points bolts?

A 02/14/2023, 4:18:03 PM That is not something we have tried.

Q Prepared Overland • 03/20/2023, 4:56:14 PM How much height does the floor and fridge slider add? I’ve rear molle shelves in the 4runner but really want to run this combo with my Dometic55, from the photos it looks possible.

A 03/30/2023, 3:17:51 PM 1.75" from the carpet. Yes, it will fit with your fridge, but you would need to call us to get the updated brackets for your current shelves.

Q Tito • 05/04/2023, 7:54:02 PM Does that the Dometic CFX sliding tray work with this configuration or is it only made for your slide out?

A 05/08/2023, 4:14:47 PM It's made for ours. You could likely drill our baseplate to make it work, however.

Q Daniel • 06/19/2023, 7:57:45 PM Does the platform create a level surface cargo area when the second row is down? Or is there a bump?

A 06/22/2023, 10:46:03 AM The back of the seats will sit slightly higher than the floor.

Q James Bugg • 10/24/2023, 6:29:16 PM Can you make this fit in the 4th gen 4runners

A 11/22/2023, 12:30:22 PM Here is our 4th gen version. https://www.victory4x4.com/product/OGFL-4R4.html

Q Robert • 03/18/2024, 4:24:32 PM Does the floor for the off grid modular drawer system (4 runner) accept the slide out for the Dometic CFX3 SLD 3545?

A 12/24/2024, 11:17:00 AM That's not something that we've verified, we do however offer a fridge slider specifically designed to work with our floors. https://www.victory4x4.com/product/OGFRS.html

Q Eric Sandoval • 05/10/2024, 9:07:25 PM What is the max weight capacity? Do you have a version that is flat and has the screws counter sunk?

A 01/08/2025, 4:09:31 PM We do not have a version that uses countersunk hardware. As for max weight, that is not something that we have tested. We have had it loaded with a camp kitchen set up and a full set of other camping gear for weeks on mountainous trails without issue. If you are looking for specific weight recommendations or have something specific you're curious about, please reach out to our CS team. [email protected]

Q MRAD • 05/30/2024, 12:15:02 PM What is the total weight of this product (the floor plate system itself, including the brackets - not including any drawers or refrigerator slides, etc).

A 07/11/2024, 5:02:15 PM 23 lbs.

Q Bryan • 09/06/2024, 3:23:59 PM Will the floor system be too hot to touch in the summer heat over 100F?

A 12/24/2024, 11:18:41 AM It will likely be just the same as any dark plastic or metal surface that you currently have in the vehicle.

Q Nathan • 12/27/2024, 3:54:32 PM Many loyal Victory4x4 customers have been requesting an off-grid modular drawer system. Would you consider creating a plate system to mount over the existing third row? Most of us exclusively shop with you, and we want to maintain a consistent theme with our vehicles while continuing to support your business.

A 01/03/2025, 11:19:00 AM Perhaps in the future, but there are no current plans for a 3rd row option.

Q Rafael • 01/07/2025, 11:21:38 PM I am planning to remove the 3rd row seats. Would this not work ?

A 01/08/2025, 11:38:35 AM It would not be compatible with 3rd row equipped 4Runners.