4Runner Rock Sliders | Strike | 3rd Gen (96-02)
★★★★★
4.53/5 Stars. (15 Reviews)
Price:
$949.00
Now:
$854.10
Code: V4RSL-ST
Weight: 118 (lbs)
- Main structure built from 2x3x3/16" box tubing.
- 1 3/4" round outer tubing. Tube gussets useable for safe step entry.
- Some drilling required.
- Made in USA.
- 3rd gen sliders will not fit 2wd models.
Strike 4Runner Rock Sliders | 3rd Gen (96-02)
Our tube sliders for the Toyota 4runner are designed to be used as a step as well as protect your rig while overlanding, rock crawling, on your daily commute, and everything in between. They are proudly made in the USA and are available in a two-stage satin textured black powdercoat over durable zinc primer finish.
Looking for answers to common questions about us or our products? See our FAQ here.
20 Questions asked on 4Runner Rock Sliders | Strike | 3rd Gen (96-02)
•
Ask us anything
Q
Josh • 03/18/2020, 8:58:36 PM
Are these strong enough to be used as a jack point?
A
03/25/2020, 3:11:33 PM
Sure are.
Q
Malcolm • 05/05/2020, 7:28:12 PM
Are these sold in pairs or individually
A
05/07/2020, 4:02:09 PM
They are sold in pairs.
Q
Sheila • 05/09/2020, 7:55:08 AM
What is weight on each slider?
A
05/11/2020, 2:36:52 PM
59lbs.
Q
Caden • 05/11/2020, 1:41:30 PM
Are they 118 lbs per bar or in total and will that affect my gas milage?
A
05/11/2020, 2:36:52 PM
118 lbs total. It's impossible for us to calculate how that will affect your mileage, but we would assume it is an almost immeasurable amount.
Q
John • 06/25/2020, 11:34:52 PM
What's the torque spec for each bolt?
A
07/01/2020, 10:08:43 AM
No official torque specs. Tight is fine.
Q
Josh • 07/21/2020, 2:46:35 PM
What is the tubing wall thickness and is it HREW or DOM?
A
07/21/2020, 3:37:30 PM
.120 wall HREW
Q
Carol • 11/04/2020, 9:15:51 AM
What is the weight limit on these?
A
11/10/2020, 5:20:32 PM
They are designed to handle the full weight of the vehicle on them.
Q
TJ • 12/14/2020, 5:08:19 PM
How far is the spacing from frame to main beam? And what’s the lengthier the sliders?
A
12/15/2020, 1:53:34 PM
Roughly 8" spacing, sliders are right around 63" long.
Q
John • 12/28/2020, 2:49:51 AM
Do they stick out past the body curve or are they tucked in?
A
12/30/2020, 4:56:07 PM
They are wider than the body.
Q
Josh B • 03/06/2021, 10:52:10 AM
How much further do these stick out beyond the side of the 4runner?
A
03/08/2021, 1:18:58 PM
Roughly and inch past the door handle.
Q
Noel Mallari • 03/17/2021, 6:13:09 PM
is this 0 degree step? the video install of sliders look like a upward slant of step portion of slider.
A
03/22/2021, 6:22:06 PM
The install video is of an old design, this step is 0 degree, yes.
Q
Mike S. • 04/07/2021, 1:54:11 AM
Are these DOM or HREW?
A
04/12/2021, 1:13:17 PM
HREW
Q
Jacob Sperling • 04/07/2021, 12:52:01 PM
What is the difference between these and the blitz rock sliders? Is it just style or is there something I'm missing?
A
04/12/2021, 1:13:17 PM
The Strike slides are a traditional tube slider, the Blitz are a fabricated boat side design.
Q
John • 04/28/2021, 12:12:09 PM
Any plans on making this style for the gx470
A
04/28/2021, 5:26:15 PM
No current plans.
Q
Joseph Schiavone • 09/22/2021, 10:06:10 PM
Name of the rims on the metallic gray 4runner in the picture above, thanks!
A
09/23/2021, 1:26:44 PM
https://mambawheels.com/current-wheels/m23/
Q
tanner • 09/28/2021, 4:57:10 PM
can you show how these bolt on the 3rd gen 4runner?
A
10/05/2021, 5:33:34 PM
We will have install instructions for this product soon.
Q
Ryan Ferralli • 11/11/2021, 6:48:35 PM
Are this bolt on without modification for a 2022 Off-Road Premium?
A
11/15/2021, 10:38:08 AM
Yes, these will install the same as the install video on a 2022.
Q
LA • 10/03/2022, 5:21:08 PM
Is there any up to date 3rd gen install doc?
A
10/11/2022, 4:52:48 PM
That is coming soon, it will be added to the end of the current install doc once available.
Q
Kris • 11/26/2022, 9:06:09 PM
Your PDF stated that the hardware included is:
8mm-1.25 Hex head Flange Bolt qty. 22
• 3/8 Hex Head Self Threading Screws qty. 3 • 5/15-18 x 3/8” Hex Head Bolt qty. 8
I received 22 Flange bolts and 7 self threading bolts. Is this correct? Seems like I’m a few short.
A
12/01/2022, 10:54:56 AM
Please contact our tech support team and we can help you figure this out: https://www.victory4x4.com/CTUS.html
Q
Alex • 03/02/2023, 2:44:46 PM
Why would it not fit for a 3 gen 2WD?
A
03/13/2023, 11:54:40 AM
The transmission cross members are in different locations.
Currently Viewing Reviews with a rating of 5. Click here to reset.
0
0
3
1
11
Blaire | September 16th, 2019
Contacted the folks at Victory and ordered my Strike sliders. Great folks and easy to work with; lead time was a couple weeks after order due to powder coating. Had them freight delivered, packaging was amazing and not a single blemish anywhere. All hardware was included + some extra bolts. Nothing complicated on install but definitely need 2 people as they are heavy.
Added to a 2015 4runner LE (already did the trail rocker swap) and they fit tight against the body. Everything lined up nicely (I had already removed XREAS so no hard lines to deal with) Although I won't use them often for their slider capability, I would have zero qualms about their strength. They extend just enough from the body to make a perfect step while still protecting my doors and underside from road debris. Absolutely would recommend to anyone in the market for a slider/step combo. They are beefy and definitely well-built! 5 stars from me. Still looking like new after months of driving and some mild offroading. Thanks guys!
Please note: Install videos are meant to be used as a guide, and aren't always the most up to date information on product installation and improvements.
Please be sure to read the PDF installation instructions as well.
Please be sure to read the PDF installation instructions as well.
