| Vehicle | 2010-2024 Toyota 4Runner (5th Gen) |
| Material | 1/8" steel |
| Finish | Satin textured black powder coat |
| Sold as | Pair |
| Made in | USA |
Tired of gear sliding around or eating up cabin space in your 4Runner? The EDC MOLLE and Accessory Panel turns the unused space on the sides of your center console into a quick-clip storage solution, so bags, hats, and everyday carry gear have a secure spot you can grab and go in seconds.
Laser cut and formed from heavy-duty 1/8" steel, each panel is built for years of daily use on and off the trail. A durable satin textured black powder coat keeps them protected and looking sharp for the long haul, while the MOLLE-compatible layout lets you clip gear on or off exactly when you need it.
Which vehicles does it fit?
It fits the 2010-2024 5th Gen Toyota 4Runner.
Is it sold as a pair?
Yes, the panels are sold in pairs.
Will my holster fit?
Yes, the panels accommodate 1.5" belt clip holsters.
Is drilling required?
Yes, installation requires drilling holes in the center console.
What can I clip to it?
Bags, hats, flashlights, radios, first aid kits, pouches, tools and other everyday carry gear.
Easy install and it's Saturday enough to hold just about anything you would want mounted for easy access. Currently have a cb, ram mount, and mag light mounted with no issues.
Thanks, James!
Just recently got into putting some small additions onto my 2010 4Runner, these were a fantastic addition! Puts all the necessary items that I need right at my finger tips, but out of the way so that they are not distracting! Install was quick and easy! Would highly recommend to anyone trying to find more storage or functional space to mount every day carry items in their vehicle. Looking forward adding more Victory 4x4 product into the 4Runner!
Thanks for the review, David!
Love these molle panels. Even with a kydex holster attached (zip ties are your friend) it does not interfere with my right leg much. Zip ties are key to locking a holster down snug, I found.
One issue I found is with the hardware. On a recent 4-wheel outing, the two bottom screws pulled out. Two things affected this: one, I had a commander length 1911 in the attached, and second, of course, was all the bouncing from the trail. I think the screws are a little short.
Easy fix was an M5 machine screw and nylock nut on the frontmost connection, and an M5 sheet metal screw back close to the seat. Bumping up to a M5 does require drilling out the fastener hole; you could go with #8 or M4, but I couldn't find nuts that size at my hardware store.
Easy to install, solid, well made, and looks great. Really functional and is a great addition to my 4Runner.
This product is awesome. I currently have my Concealed Carry Nerd Holster mounted to the front of the panel. Then I have some walkies for overlanding mounted on the other one. My only complaint on this product is the mounting hardware. I have an aftermarket headunit so I am sometimes pulling apart my dashboard. The way that this mounts, you have to take out the bottom screws to be able to take the panels off. After unscrewing and rescrewing in the screws, the holes are basically useless after that. The mounting hardware could be better or for a more permanent mount, have it screw into just the silver panel on the trans tunnel. I have had to rescrew holes in my dash panels so when I do sell the car the next owner wont be too happy about that. But I personally do not care. Better mounting hardware and/or different spots to drill this piece in so it only attaches to one part would be better. OTHER than all that, I do love this product. The spacers given give me just the right amount of space for me to put my Concealed carry pistol on it and it sits in a good spot. It doesnt hit my leg when I am driving even with a bigger gun mounted to it. If you have a molle pouch then it might hit your leg but then you have a nice knee pillow while driving LOL! Great product. Might drill different holes in it so I can mount it to one panel in the car.
Awesome little accessory. Great place to put cords and even a nice little slot for phones, and wallets. Great place to put gear that you need handy such as a flashlight or your sidearm. Victory 4x4 does it again.
Ordered these up awhile back and install was easy, although tedious near the seat area. The panels are solid, my only real concern is the longevity of the small screws tearing out of the center console plastic after a few years. I have a pen and knife clipped in there and it's a really hand location. Just need to find the right banana holder and I'm good to go!!
This is a solid organizer for the front console. I keep my holster, and other tools readily available. It doesn't protrude and make riding uncomfortable. I'd like to see them make some more mods for the console, but time will tell. It's well made and was shipped with every consideration to the rigors the USPS. Installation is super easy with the video provided by the folks at Victory 4x4. The team is dialed in to craftsmanship and customer service. I'm not paid to say this, but sincerely believe in giving credit where it's due. This is one of the most with it aftermarket providers in the game. I will buy more from this team.
Love these! They look great and are solid.. Arrived quickly (even after a tiny overlook of my phone order, it was a problem solved very quickly!) and arrived with no damage. Packaged well and included stickers, which always rules. Install is a snap and it took me less than 30 minutes. Thanks!
I really like how sturdy these are. I wasn't sure how much they would hold up with self tapping screws through plastic but the hold a good amount stuff. An awesome storage solution all 9f your EDC equipment that you could ever want close at hand.
The center console molle and accessory panel looks great! Easy to install and provides a convenient location to store my "banana" (watch the installation video) when driving in these crazy times.
These panels really augment the capability of my 2019 4Runner. A must for anyone who must be organized and ready to what the trail brings. Well built, no shipping issues, product arrived ready for install.
See photos
100% perfect condition when i received it! They pack their items extremely well!! It was super simple to install and looks great! Drivers side holds my "tool" and flashlight and the passenger side holds 2 mobile radios. I 100% Definitely recommend this product and if you are curious, the customer service is Super Top Notch!!
Panels are awesome. Mounted a Glock 43 holster perfectly on the drivers side. I called a head and they were in stock ready to ship with my bumper.
I wish I could review these, seeing as I ordered them 4 weeks ago and they still haven't even been shipped yet. Advice- when they say it'll take 2-3 weeks to ship, be prepared for a much longer wait.
Sorry for the wait! We had a couple weeks of downtime while we installed a new laser cutter and that pushed our lead times on MOLLE panels longer than usual. We apologize for not contacting you directly. Please feel free to reach out to info@victory4x4.com if we can be of furhter asistance.
Reviews come from our customers. Buyers are invited to rate their parts after their order ships, and those reviews are marked Verified Buyer. We publish positive and negative reviews alike.
No customer photos yet. Got this part on your rig? Be the first to show it off.
