Only compatible with our Tundra Strike Rear Bumper.
Built-in hidden hitch¹ under flippable license plate mount.²
Spare will not fit in the factory location with Hidden Hitch installed.
Proudly designed and made in the USA.
¹ Concessions have been made for extra ground clearance and a sleek appearance and you will need to adjust your equipment accordingly. Depending on your setup this may mean longer drop hitches, wiring extensions, etc...
²Carries no SAE certification, nor is it designed to meet any DOT or FMCSA regulation.
We produce these products in a low volume compared to the OEMs or aftermarket receiver hitch companies. As such, it's not feasible for us to get this product tested against SAE J684 specifications or design it meet specific DOT or FMCSA regulations. So while we try to over-engineer our products with the loads of the factory vehicle capacity in mind; towing a trailer on public highways is at your own risk and we make no claims on the legality or viability of doing so. If you are using the large towing capacity of the Tundra, we recommend keeping the factory receiver hitch which is also compatible with our Tundra Strike Rear Bumper.We cannot offer any recommendations on capacity beyond this.
Please note: Install videos are meant to be used as a guide, and aren't always the most up to date information on product installation and improvements. Please be sure to read the
PDF installation instructions (if available)