May 22, 2026
Amazing and easy install!
This absolutely gave our new passport that slight edge I was looking for! And now we will be able to put our tent on without any issue. The install was very straight forward and easy amazing system
Roof Rack | Evolution Series | Honda Passport 4th Gen (26+)
5.0 · 1 rating
Fit at a Glance
More questions? See the FAQ
Fits
2026+ 4th Gen Honda Passport
Size
87" x 47.5" x 2.5", 49 lbs
Load
300 lbs dynamic, 1000 lbs static
$1,061.65
Regular
Black Friday All Month Sale – Save $187.35
$14.95 Flat Rate Shipping
Layered side rails with a 3/16" inner rail and 1/8" outer layer, laser cut from aluminum for rigidity without the weight of steel
1000 lb static rating, enough for a roof top tent and the people sleeping in it
Steel mounts made for the 4th Gen Passport for a direct, secure fit
Powder coated crossbars that won't fade or turn purple in the sun the way anodized finishes can
Milled t-nut drop-in spots let you add t-slot hardware without pulling the crossbars, so you can mount gear anywhere along the rack
Fits roof top tents, awnings, recovery boards, lighting and our full line of rack accessories
Two finishes so the rack matches the build you have in mind
Black stainless hardware included, ready to install out of the box
Full bolt-on install with no drilling
Limited lifetime warranty against material, manufacturing and design defects
Fits 2026+ Honda Passport (4th Gen)
Your sunroof tilts and slides normally with the rack installed
The rack sits 2.5" above the highest point of the roof
We recommend paint protection film under the front and rear fairings where they touch the vehicle, so trail dust can't scratch the paint over time
See full warranty details here.
Roof Rack | Evolution Series | Honda Passport 4th Gen (26+)
✓ Vehicle: 2026+ Honda Passport (4th Gen)
✓ Finish: Stealth Black or Signature Silver Accents, satin textured powder coat
✓ Material: Laser cut aluminum side rails, 3/16" inner with 1/8" outer layer
✓ Rack Dimensions: 87" x 47.5" x 2.5"
✓ Weight: 49 lbs
✓ Load Rating: 300 lbs Dynamic / 1000 lbs Static
✓ Warranty: Limited Lifetime
✓ Made in USA: Made to order in Kalamazoo, Michigan
Your Passport runs out of room quickly once recovery gear, camp kit and a cooler go in, and a roof top tent needs a platform you can trust overnight. The Evolution Series gives you that platform with a strong, low-profile rack that grows with your build, so your gear rides up top and the cabin stays open.
Strength comes from layered side rails, a 3/16" aluminum inner rail backed by a 1/8" outer layer, which carry a 1000 lb static rating while keeping the whole rack at just 49 lbs. Versatility comes from milled t-nut drop-in spots, so lights, awnings, tents and recovery boards bolt on wherever you need them. Every Evolution rack is laser cut, formed and bolted together with no welds, because welding softens aluminum around every weld.
Want to see that strength in the real world? See what happened when a 200-year-old oak fell on an Evolution rack.
You also choose the look. Stealth Black gives you a clean profile that matches your factory trim, while Signature Silver Accents finishes the outer rail layer in textured silver for the Victory style that stands out at the trailhead.
Victory 4x4 has built over 10,000 roof racks in Kalamazoo since 2019, and every one is made to order by the team that designed it.
Built Strong
Built to Adapt
Built to Last
Accessories & Add-Ons
Build out your setup with the Roof Top Tent Mounting Brackets, Awning & Accessory Mounts, Platform Panels and the Roof Rack LED Light Kit. Everything bolts straight to the rack's crossbars using standard t-slot hardware. Need extra hardware for more accessories? Grab the T-Slot Nut and Stud Kit (set of 12), or the T-Slot Nut and Bolt Kit and T-Slot Stud Kit. Browse roof rack accessories →
Fitment & Notes
Which vehicles does it fit?
It fits the 2026+ 4th Gen Honda Passport.
How much weight can it hold?
It is rated for 300 lbs dynamic (while driving) and 1000 lbs static (when parked).
Will my sunroof still work?
Yes. Your sunroof tilts and slides normally, and the rack sits 2.5" above the highest point of the roof.
Can I leave out the crossbars so they don't block the view out of my sunroof?
Yes, you can. If you leave the crossbars in, your sunroof still works like normal.
How big is it and what does it weigh?
The rack is 87" x 47.5" x 2.5" and weighs 49 lbs.
Will the fairings scratch my paint?
We recommend paint protection film under the front and rear fairings where they touch the vehicle.
Still have a question about fit?Talk with the team that builds it, right here in Kalamazoo. Mon to Fri, 8:30 AM to 4:30 PM ET.
Customer Reviews
5.0
1 rating · 1 written
Reviews come from our customers. Buyers are invited to rate their parts after their order ships, and those reviews are marked Verified Buyer. We publish positive and negative reviews alike.
