• Victory 4x4
    0

    Tundra Roof Rack | Evolution Series | 3rd Gen (2022+)

    • Tundra Roof Rack | Evolution Series | 3rd Gen (2022+)
    • Tundra Roof Rack | Evolution Series | 3rd Gen (2022+)
    • Tundra Roof Rack | Evolution Series | 3rd Gen (2022+)
    • Tundra Roof Rack | Evolution Series | 3rd Gen (2022+)
    • Tundra Roof Rack | Evolution Series | 3rd Gen (2022+)
    • Tundra Roof Rack | Evolution Series | 3rd Gen (2022+)
    • Tundra Roof Rack | Evolution Series | 3rd Gen (2022+)
    • Tundra Roof Rack | Evolution Series | 3rd Gen (2022+)
    • Tundra Roof Rack | Evolution Series | 3rd Gen (2022+)
    • Tundra Roof Rack | Evolution Series | 3rd Gen (2022+)
    • Tundra Roof Rack | Evolution Series | 3rd Gen (2022+)

    $899.10 $999.00

    $9.95 Flat Rate Shipping

    Code: VTU22RK | Weight: 45 (lbs)



      Tundra Roof Rack | Evolution Series | 3rd Gen (2022+)

      Specs
      βœ“ Vehicle: 2022+ Toyota Tundra (3rd Gen)
      βœ“ Weight: 49 lbs
      βœ“ Rack Dimensions: 63" x 54.5" x 2.5"
      βœ“ Material: 3/16" aluminum with steel mounting brackets and extruded aluminum rails
      βœ“ Finish: Satin textured black powder coat over zinc primer, with silver textured side accent panels
      βœ“ Load Rating: 300 lbs Dynamic / 800 lbs Static
      βœ“ Warranty: Lifetime
      βœ“ Made in: USA

      Need to haul gear that doesn't fit inside your Tundra, or ready to add more cargo capacity? This roof rack gives you a solid, secure place to mount almost anything up top, so your gear has a place to go and your interior stays free for the essentials.

      This rack is built from extruded aluminum rails with steel mounting brackets, giving you the strength you need without adding unnecessary weight. Milled T-nut access points run the length of the rack, so you can mount gear anywhere along the top.

      Features:

      • Laser cut and formed from 3/16" aluminum with steel mounting brackets and extruded aluminum rails for lasting strength

      • Silver textured accent side rails give the rack a custom look that sets it apart

      • Milled T-nut access points let you mount gear anywhere along the rack

      • Retains panoramic moonroof functionality

      • Available with or without a 40" light bar cutout (light bar not included)

      • Black stainless hardware included

      • Easy bolt-together installation, drill bit and rivnuts included

      • Made in the USA

      Fitment & Notes

      • Fits 3rd Gen Toyota Tundra (2022+)

      • Rack sits 2.5" above the highest point of the roof (center point)

      • Rated for 300 lbs dynamic load (while driving) and 800 lbs static load (when parked), evenly distributed across the rack

      • Light bar cutout version includes light bar mounting brackets. Cutout fairing fits a 41.25" max lens housing width single-row LED light bar; bars up to 43.5" (mounting stud width) will fit with our mounts, but trimming the fairing is required

      • We recommend applying paint protection film under the front and rear fairings where they contact the vehicle, to prevent dirt and debris from scratching paint over time

      • Backed by a lifetime warranty against material, manufacturing, and design defects. See our warranty page for full details

      A quick note on weight ratings:
      These are a guide, not a replacement for your vehicle's manufacturer roof load limits or GVWR, so check your owner's manual first. Added weight changes handling, especially off-road or in an emergency maneuver, so load smart. As with any modification, you're responsible for how it's installed, loaded, and used.





    Please note: Install videos are meant to be used as a guide, and aren't always the most up to date information on product installation and improvements.
    Please be sure to read the PDF installation instructions (if available) as well.




    : Please select Year / Make / Model above to verify fitment

    Related Products