Rear Bumper | Strike | Toyota 4Runner 5th Gen (10-24)

Name: Rear Bumper | Strike | Toyota 4Runner 5th Gen (10-24)
Brand: Victory 4x4
SKU: V4R5RS2
Price: 1719.2 USD
Availability: InStock
Rating: 5.0 (10 reviews)

5.0 · 10 ratings

$1,719.20

Regular

~~$2,149.00~~

Early Black Friday Pricing: 20% Off – Save $429.80

$450 Freight Shipping

Code: V4R5RS2 | Weight: 110 (lbs)

PDF Install GuideDownload or print the PDF

Install VideoWatch on YouTube Video 2Watch on YouTube

Description

Rear Bumper | Strike | Toyota 4Runner 5th Gen (10-24)

Specs
✓ Vehicle: 2010-2024 Toyota 4Runner (5th Gen)
✓ Material: 3/16" steel
✓ Finish: Satin-textured black powder coat over zinc primer, or bare steel (uncoated)
✓ Made in: USA
✓ Shipping: Freight only (LTL, flat rate, ships on pallet)

When you need maximum protection, recovery options, and a modular swingout system, our Strike Series rear bumper is the choice. Integrated cube light mounts, 3/4" recovery tabs, and built-in provisions for dual swingouts give you a setup that can grow with your build, add or remove carriers any time.

Features:

Laser cut and formed from 3/16" steel for maximum strength and durability
Finished with a durable powder coat over zinc primer for lasting corrosion resistance
Built-in hitch adds versatility on and off the trail¹
Built-in provisions for cube lights improve visibility after dark (lights sold separately)
Built-in provisions for left and right Adventure Carriers, add swingouts at any time (sold separately)
Built-in Hi-Lift jack points
Proudly designed and made in the USA

Accessories & Add-Ons

Add swingout storage with our Adventure Carriers
Retain BSM sensor function with our Blind Spot Monitor Relocation
Pair with a Baja Designs work/scene pattern cube light or a Diode Dynamics clear/flood cube light for reverse lighting

Fitment & Notes

Fits all 4Runner trim levels. Does not retain Limited proximity sensors
This bumper ships LTL freight on a pallet at a flat rate. Learn more about freight shipping
Can fit up to a 33" tire in the factory location with this bumper installed.
Bare steel lets you finish it your way. Get it coated soon after delivery to prevent surface rust.

¹ This hitch is built to handle factory tow capacity loads. As a low-volume manufacturer, we haven't pursued SAE, DOT, or FMCSA certification for it. If a certified hitch is important to you, look for a bumper that retains the factory receiver.

FAQ

Which vehicles does it fit?

It fits all 2010-2024 5th Gen 4Runner trim levels. It does not retain the Limited proximity sensors.

Does it keep my blind spot monitors?

Add our Blind Spot Monitor Relocation brackets to retain BSM sensor function.

Does it have a hitch?

Yes. The built-in hitch handles factory tow capacity loads. It is not SAE, DOT or FMCSA certified.

How big a spare fits?

Up to a 33" tire fits in the factory spare location with this bumper installed.

Can I add swingouts?

Yes. It has built-in provisions for left and right Adventure Carriers, which you can add any time (sold separately).

How does it ship?

It ships LTL freight on a pallet at a flat rate.

Still have a question about fit?Talk with the team that builds it, right here in Kalamazoo. Mon to Fri, 8:30 AM to 4:30 PM ET.

Book a call Call 269-459-8447 Email us

Reviews (10)

Customer Reviews

5.0

10 ratings · 10 written

5★10

4★0

3★0

2★0

1★0

Aug 29, 2024

cube/pod lights

what size/brand cube light work well with rear bumper

jon

Response from our team

Thanks for the review Jon, we like Baja Designs Squadrons in a flood pattern. But many similar size lights work great.

Aug 6, 2024

Good

Jason D Murphy

Apr 3, 2024

Good bumper, instructions not as clear as they could be

The bumper seems to be very good quality. The fit was good, once I figured out what to look for. The instructions are outdated in the lock flange install. The new design needs to go on before the swing pin goes in. (The video and pics show an old design, going on after.) And then the description of the product on the website says, "Compatible with BSM sensors..." but it should make it clear when the BSM is required. I will need to drop the bumper to get those installed after the fact. Didn't discover this until my BSM were fritzing, after the install.

Ken V

Response from our team

Thanks for the review Ken, we will clarify that BSM bracket requirement on the product page.

Oct 1, 2021

5th Gen Rear Bumper

Excellant product, pretty simple install other than having to cut the plastic! But if you take your time, tape it off and re-measure a few times you should have no problems. The tool I used to do my cutting was a Dremel, super easy at low speed follow the tape line then turn it up a notch to cut. The you tube video says down 5 inches, but I should have gone 5 and half inches and 2 around the back for a tighter fit. Does not look bad as it is, but that's what I should've done.

Luis

May 26, 2021

A bit disappointed

I like that the bumper is really modular, and you can add as you need. This is a big reason why I ordered this bumper. The install vids seemed straightforward enough, but it did not go nearly as smoothly it should have. None of the holes lines up, so there was a ton of jostling, and prybars required to get all the nuts and bolts together. Additionally, the rear plate with the "victory logo did not fit, nor did the screws that were supposed to hold it. I had to grind part of the edge off the logo piece, and tap all the bolt holes for the fasteners to get it to work. Once installed, everything is ok, although the bumper does sit atad off to one side...tired of messing with it. Lastly, the hundreds of dollars worth of powder coat has begun to chip off...hasn't been hit, banged, dropped or anything, just started flaking off.

Response from our team

We are sorry to hear about the install issues. If you are still having problems, please contact our tech support team. The holes should be lining up on the install.

Mar 25, 2021

Love this unit

Very clean look and functional. Got multiple accessories with it as well. No regrets and would highly recommend to others.

Bird Dog Overland

Mar 24, 2021

Bumper install review

Good evening,
I ordered my rear bumper without any swing arms to start. The delivery was on schedule and the item arrived perfect without any damage. When installing I noticed various things that were not clear on any video or duering the pruchase information. First of all the contact points at the rear of the bumper did not allign with the original position, this due that the holes where higher then original. Had to adjust and make holes bigger. Aditionally the mud flaps do not adjust to the new bumer, this creates an image of a section as incomplete but this is not covered in the install video. The plate with the Victory Logo did not allign corectly for the bolts to go in so drilling was required. The 3X3 cube lights is not mentioned in the video but the space is not flush, this creates a problem on choosing which light.. I ended up adding a light mounted externally in order to cover the hole completely but aditional holes had to be made in order fot the install. Overall i like the bumper and feel it looks great on the car but things would have been much easier with more information.

Josh

Jun 20, 2020

Excellent fit. Excellent Customer Service. Will be using Victory 4x4 products for a long time.

2015 4Runner Trail Premium
Installed the Strike bumper w/ dual Adventure Carriers, Tire mount, Dual Jerry Can Carrier, and Ladder for Adventure Carrier. I must say that with the help of the install videos, the install was a breeze.
My shipment arrived in a timely manner even during the whole COVID-19 deal. Was extremely well packaged. All powder coated components were perfect. Not blemish that I could find. Don't know how to post pics.
Anyway, great company. Great service. Great products. Buy with confidence. You will not regret it.

Sjbill17

Dec 6, 2019

Big booty

Feel like your rig is lacking in the boooo tayyy?
Well this sumbich right hur is just what you need...
Make that thin backside look like you took the 100 day squat challenge and made it your biotch.
I'm talking J Lo booty. Not that Miley Cyrus thanksgiving turkey looking backside.
Get one these and you'll have all the boys jaw dropping when you roll past in the club.

Steve

Response from our team

Haha, best review ever.

Nov 26, 2019

Great Product

I was impressed by the quality of the product and the quality of the packaging done to protect the bumper during the shipping process. The video guide was informative and easy to follow. Customer service has been great. The price point is competitive as well.

Nate

Reviews come from our customers. Buyers are invited to rate their parts after their order ships, and those reviews are marked Verified Buyer. We publish positive and negative reviews alike.