• Victory 4x4
    0

    Roof Rack | Nissan Frontier 3rd Gen (22+)

    • Roof Rack | Nissan Frontier 3rd Gen (22+)
    • Roof Rack | Nissan Frontier 3rd Gen (22+)
    • Roof Rack | Nissan Frontier 3rd Gen (22+)
    • Roof Rack | Nissan Frontier 3rd Gen (22+)
    • Roof Rack | Nissan Frontier 3rd Gen (22+)
    • Roof Rack | Nissan Frontier 3rd Gen (22+)
    • Roof Rack | Nissan Frontier 3rd Gen (22+)
    • Roof Rack | Nissan Frontier 3rd Gen (22+)
    Fit at a Glance More questions? See the FAQ
    Fits
    2022+ 3rd Gen Nissan Frontier
    Size
    49" x 47.5" x 2.5"
    Load
    300 lbs dynamic, 800 lbs static
    Install Time*
    Home: 1 day · Shop: 3 to 4 hr
    *Times are estimates and vary with vehicle condition and installer skill.
    $764.15
    Regular
    $899.00
    Black Friday All Month Sale – Save $134.85
    $14.95 Flat Rate Shipping

    Code: VRKF3 | Weight: 35 (lbs)



        Nissan Frontier Roof Rack | 3rd Gen (2022-up)
        Specs
        Vehicle2022+ Nissan Frontier (3rd Gen)
        Material3/16" aluminum with steel mounting brackets and extruded aluminum rails
        FinishSatin textured black powder coat over zinc primer
        Load Rating300 lbs Dynamic / 800 lbs Static ✓ Rack Dimensions: 49" x 47.5" x 2.5"
        WarrantyLimited Lifetime
        Made inUSA

        Need to haul gear that doesn't fit inside your Frontier, or ready to add more cargo capacity? This roof rack gives you a solid, secure place to mount almost anything up top, so your gear has a place to go and your interior stays free for the essentials.

        This rack is built from extruded aluminum rails with steel mounting brackets, giving you the strength you need without adding unnecessary weight. Milled T-nut access points run the length of the rack, so you can mount gear anywhere along the top.

        Features
        • Laser cut and formed from 3/16" aluminum with steel mounting brackets and extruded aluminum rails for lasting strength
        • Milled T-nut access points let you mount gear anywhere along the rack
        • Sunroof tilt and slide features still work with the rack installed
        • Available with or without a 40" light bar cutout (light bar not included)
        • Hardware included
        • Made in the USA
        Accessories & Add-Ons
        • Black stainless hardware available (see related products)

        Extra Mounting Hardware
        Need extra hardware for more accessories? Grab the T-Slot Nut and Stud Kit (set of 12), or the T-Slot Nut and Bolt Kit and T-Slot Stud Kit.

        Fitment & Notes
        • Fits 3rd Gen Nissan Frontier (2022+)
        • Installation requires drilling
        • Rated for 300 lbs dynamic load (while driving) and 800 lbs static load (when parked), evenly distributed across the rack
        • Light bar cutout version includes light bar mounting brackets. Cutout fairing fits a 41.25" max lens housing width single-row LED light bar; bars up to 43.5" (mounting stud width) will fit with our mounts, but trimming the fairing is required
        • We recommend applying paint protection film under the front and rear fairings where they contact the vehicle, to prevent dirt and debris from scratching paint over time
        • Backed by a limited lifetime warranty against material, manufacturing, and design defects. See our warranty page for full details

        A quick note on weight ratings:
        These are a guide, not a replacement for your vehicle's manufacturer roof load limits or GVWR, so check your owner's manual first. Added weight changes handling, especially off-road or in an emergency maneuver, so load smart. As with any modification, you're responsible for how it's installed, loaded, and used.


        Made in USA

    Which vehicles does it fit?
    It fits the 2022+ 3rd Gen Nissan Frontier. Installation requires drilling.

    How much weight can it hold?
    It is rated for 300 lbs dynamic (while driving) and 800 lbs static (when parked), evenly distributed.

    Will my sunroof still work?
    Yes, the sunroof tilt and slide features still work with the rack installed.

    Can I leave out the crossbars so they don't block the view out of my sunroof?
    Yes, you can. If you leave the crossbars in, your sunroof still works like normal.

    How big is it?
    The rack is 49" x 47.5" x 2.5".

    Can I run a light bar?
    Yes. The light bar cutout version includes mounting brackets and fits a single-row bar up to 41.25" lens housing width. Bars up to 43.5" mounting stud width fit after trimming the fairing.

    Still have a question about fit?Talk with the team that builds it, right here in Kalamazoo. Mon to Fri, 8:30 AM to 4:30 PM ET.

    No customer photos yet. Got this part on your rig? Be the first to show it off.





    Related Products