• Victory 4x4
    0

    Roof Rack | Toyota Sequoia 3rd Gen (23+)

    • Roof Rack | Toyota Sequoia 3rd Gen (23+)
    • Roof Rack | Toyota Sequoia 3rd Gen (23+)
    • Roof Rack | Toyota Sequoia 3rd Gen (23+)
    • Roof Rack | Toyota Sequoia 3rd Gen (23+)
    • Roof Rack | Toyota Sequoia 3rd Gen (23+)
    • Roof Rack | Toyota Sequoia 3rd Gen (23+)
    • Roof Rack | Toyota Sequoia 3rd Gen (23+)
    • Roof Rack | Toyota Sequoia 3rd Gen (23+)
    Fit at a Glance More questions? See the FAQ
    Fits
    2023+ 3rd Gen Toyota Sequoia
    Size
    92" x 54.5"
    Load
    300 lbs dynamic, 800 lbs static
    Install
    Bolt-on, no drilling
    Install Time*
    Home: 1 day · Shop: 3 to 4 hr
    *Times are estimates and vary with vehicle condition and installer skill.
    $1,167.90
    Regular
    $1,374.00
    Black Friday All Month Sale – Save $206.10
    $14.95 Flat Rate Shipping

    Code: VSQRK-3G | Weight: 63 (lbs)



      Specs
      Vehicle2023+ Toyota Sequoia (3rd Gen)
      Material3/16" aluminum with steel mounting brackets and extruded aluminum rails
      FinishSatin textured black powder coat over zinc primer
      Load Rating300 lbs Dynamic / 800 lbs Static
      Rack Dimensions92" x 54.5"
      WarrantyLimited Lifetime
      Made inUSA

      Need to haul gear that doesn't fit inside your Sequoia, or ready to add more cargo capacity? This roof rack gives you a solid, secure place to mount almost anything up top, so your gear has a place to go and your interior stays free for the essentials.

      This rack is built from extruded aluminum rails with steel mounting brackets, giving you the strength you need without adding unnecessary weight. Milled T-nut access points run the length of the rack, so you can mount gear anywhere along the top, and easy bolt-together installation means no drilling into your roof.

      Features
      • Laser cut and formed from 3/16" aluminum with steel mounting brackets and extruded aluminum rails for lasting strength
      • Milled T-nut access points let you mount gear anywhere along the rack
      • Easy bolt-together installation, no drilling required
      • Fairing edge trim included
      • Available with or without a 40" light bar cutout (light bar not included)
      • Hardware included
      • Paint protection film, anti-seize and Ultra Black sealant included
      • Made in the USA
      Accessories & Add-Ons

      Extra Mounting Hardware
      Need extra hardware for more accessories? Grab the T-Slot Nut and Stud Kit (set of 12), or the T-Slot Nut and Bolt Kit and T-Slot Stud Kit.

      Fitment & Notes
      • Fits 3rd Gen Toyota Sequoia (2023+)
      • Compatible with the panoramic sunroof for installation, but the sunroof will not open without interference once the rack is installed
      • Rated for 300 lbs dynamic load (while driving) and 800 lbs static load (when parked), evenly distributed across the rack
      • Light bar cutout version includes light bar mounting brackets. Cutout fairing fits a 41.25" max lens housing width single-row LED light bar; bars up to 43.5" (mounting stud width) will fit with our mounts, but trimming the fairing is required
      • We recommend applying paint protection film (included) under the front and rear fairings where they contact the vehicle, to prevent dirt and debris from scratching paint over time
      • Backed by a limited lifetime warranty against material, manufacturing, and design defects. See our warranty page for full details

      A quick note on weight ratings:
      These are a guide, not a replacement for your vehicle's manufacturer roof load limits or GVWR, so check your owner's manual first. Added weight changes handling, especially off-road or in an emergency maneuver, so load smart. As with any modification, you're responsible for how it's installed, loaded, and used.

      Made in USA

    What comes with the roof rack besides the hardware?
    Every rack includes paint protection film for the contact points, anti-seize for the bolts and Ultra Black sealant for the roof mounts, so you have everything you need for a clean, protected install.

    Which vehicles does it fit?
    It fits the 2023+ 3rd Gen Toyota Sequoia.

    Will my panoramic sunroof still work?
    The rack installs with the panoramic sunroof, but the sunroof will not open without interference once the rack is installed.

    Can I leave out the crossbars so they don't block the view out of my panoramic sunroof?
    Yes, you can. If you leave the crossbars in, your panoramic sunroof still works like normal.

    How much weight can it hold?
    It is rated for 300 lbs dynamic (while driving) and 800 lbs static (when parked), evenly distributed.

    How big is it?
    The rack is 92" x 54.5".

    Can I run a light bar?
    Yes. The light bar cutout version includes mounting brackets and fits a single-row bar up to 41.25" lens housing width. Bars up to 43.5" mounting stud width fit after trimming the fairing.

    Do I need to drill?
    No. It is an easy bolt-together install with hardware and fairing edge trim included.

    Still have a question about fit?Talk with the team that builds it, right here in Kalamazoo. Mon to Fri, 8:30 AM to 4:30 PM ET.

    No customer photos yet. Got this part on your rig? Be the first to show it off.



    ACCESSORY MOUNTS

    A wide variety of accessory / lighting mounts available and the list is growing!

    See related products below!



    SUNROOF COMPATIBLE

    Allows for full functionality of all standard sunroofs



    BUILT FOR ADVENTURE

    Designed with your outdoor gear in mind.





    Related Products