Roof Rack | Evolution Series | Toyota Land Cruiser 100 & Lexus LX470 (98-07)

Roof Rack | Evolution Series | Toyota Land Cruiser 100 & Lexus LX470 (98-07)

✓ Vehicle: 100 Series Land Cruiser / Lexus LX470 (1998-2007)

✓ Finish: Stealth Black or Signature Silver Accents, satin textured powder coat

✓ Material: Laser cut aluminum side rails, 3/16" inner with 1/8" outer layer

✓ Rack Dimensions: 81" x 47.5" x 2.5"

✓ Weight: 49 lbs

✓ Load Rating: 300 lbs Dynamic / 1000 lbs Static

✓ Warranty: Limited Lifetime

✓ Made in USA: Made to order in Kalamazoo, Michigan

Your Land Cruiser runs out of room quickly once recovery gear, camp kit and a cooler go in, and a roof top tent needs a platform you can trust overnight. The Evolution Series gives you that platform with a strong, low-profile rack that grows with your build, so your gear rides up top and the cabin stays open.

Strength comes from layered side rails, a 3/16" aluminum inner rail backed by a 1/8" outer layer, which carry a 1000 lb static rating while keeping the whole rack at just 49 lbs. Versatility comes from milled t-nut drop-in spots and a convertible front fairing, so lights, awnings, tents and recovery boards bolt on wherever you need them. Every Evolution rack is laser cut, formed and bolted together with no welds, because welding softens aluminum around every weld.

Want to see that strength in the real world? See what happened when a 200-year-old oak fell on an Evolution rack.

You also choose the look. Stealth Black gives you a clean profile that matches your factory trim, while Signature Silver Accents finishes the outer rail layer in textured silver for the Victory style that stands out at the trailhead.

Victory 4x4 has built over 10,000 roof racks in Kalamazoo since 2019, and every one is made to order by the team that designed it.

Built Strong

• Layered side rails with a 3/16" inner rail and 1/8" outer layer, laser cut from aluminum for rigidity without the weight of steel

• 1000 lb static rating, enough for a roof top tent and the people sleeping in it

• Steel mounts made for the 100 Series Land Cruiser and LX470 for a direct, secure fit

• Powder coated crossbars that won't fade or turn purple in the sun the way anodized finishes can

Built to Adapt

• Milled t-nut drop-in spots let you add t-slot hardware without pulling the crossbars, so you can mount gear anywhere along the rack

• Convertible front fairing that sits raised for a finished look or drops down for a 40" single-row light bar

• Fits roof top tents, awnings, recovery boards, lighting and our full line of rack accessories

• Two finishes so the rack matches the build you have in mind

Built to Last

• Black stainless hardware included, ready to install out of the box

• Full bolt-on install with no drilling

• Limited lifetime warranty against material, manufacturing and design defects

Accessories & Add-Ons

Build out your setup with the Roof Rack Side Accessory Panel, Roof Top Tent Mounting Brackets, Awning & Accessory Mounts, Platform Panels and the Roof Rack LED Light Kit. Everything bolts straight to the rack's crossbars using standard t-slot hardware. Need extra hardware for more accessories? Grab the T-Slot Nut and Stud Kit (set of 12), or the T-Slot Nut and Bolt Kit and T-Slot Stud Kit. Browse roof rack accessories →

Fitment & Notes

• Fits 100 Series Land Cruiser / Lexus LX470 (1998-2007)

• Your sunroof tilts and slides normally with the rack installed

• The rack sits 2.5" above the highest point of the roof

• The light bar cutout version includes light bar mounting brackets. The cutout fairing fits a single-row LED light bar up to 41.25" lens housing width, and bars up to 43.5" (mounting stud width) fit with our mounts after trimming the fairing

• We recommend paint protection film under the front and rear fairings where they touch the vehicle, so trail dust can't scratch the paint over time

• See full warranty details here.

Which vehicles does it fit?

It fits the 1998-2007 Toyota Land Cruiser 100 Series and Lexus LX470.

How much weight can it hold?

It is rated for 300 lbs dynamic and 1000 lbs static, enough for a rooftop tent and the people sleeping in it, while the rack itself weighs just 49 lbs.

Does my sunroof still work?

Yes, the sunroof tilts and slides normally with the rack installed.

Can I leave out the crossbars so they don't block the view out of my sunroof?

Yes, you can. If you leave the crossbars in, your sunroof still works like normal.

How high does it sit?

The rack sits 2.5" above the highest point of the roof.

Can I run a light bar?

Yes. Choose the light bar cutout version, which includes light bar mounting brackets. The fairing fits a single-row bar up to 41.25" lens housing width, and bars up to 43.5" mounting stud width fit after trimming the fairing.

How do I mount gear?

Milled t-nut drop-in spots let you add t-slot hardware anywhere along the rack without pulling the crossbars. Cargo boxes mount right to the crossbars, since Thule box clamps pinch the crossbar and Yakima grippers wrap around it.

Will the fairings scratch my paint?

We recommend paint protection film under the front and rear fairings where they touch the vehicle, so trail dust can't scratch the paint over time.